Samsung Dart SGH-T499 User Manual page 137

Manually Adding a Wi-Fi Network
Press
1.
(Settings) Wireless and networks
settings.
Tap Wi-Fi to turn it on.
2.
Tap Add Wi-Fi network.
3.
Enter the SSID (Service Set Identifier) and
4.
Security settings then tap Save.
Note: An SSID is a unique key which identifies a
wireless LAN. Its purpose is to stop other
wireless equipment from accessing your LAN
— whether accidentally or intentionally. To
communicate, wireless devices must be
configured with the same SSID.
Bluetooth settings
In this menu you can activate Bluetooth, view or
assign a device name, activate your phone so other
Bluetooth devices can discover it, or scan for other,
available Bluetooth devices with which to pair.
Activating Bluetooth
Press
(Settings) Wireless and networks
Bluetooth settings and tap Bluetooth to turn it
on.
Note: Bluetooth must be enabled prior to use.
and then tap
Wi-Fi
and then tap
Activating the Device Name
Activate Bluetooth.
1.
Press
2.
(Settings) Wireless and networks
Bluetooth settings
assigned device name displays.
Press to erase the current device name
3.
and enter a new name for this device using
the keyboard.
Tap OK to confirm your setting.
4.
Activating Visibility
Press
(Settings) Wireless and networks
Bluetooth settings
The phone is now activated for discovery for
119 seconds so you can pair with another
device. After 119 seconds the phone
becomes undiscoverable again.
Scanning for Devices
This option allows you to scan for active Bluetooth
devices so you can pair with them.
Press
1.
(Settings) Wireless and networks
Bluetooth settings
phone begins scanning and lists any
discovered devices in the Bluetooth devices
section.
Tap a device name to pair with the device.
2.
Changing Your Settings
and then tap
Device name. The
and then tap
Visible.
and then tap
Scan devices. Your
133