Pairing Bluetooth Devices - Samsung Dart SGH-T499 User Manual

•
Setting your device's visibility (or "discoverability") for
other Bluetooth devices
•
Displaying your device's Bluetooth address
To access the Bluetooth Settings menu:
Press
1.
(Settings) Wireless and networks
Bluetooth settings.
Verify Bluetooth is active. Indicated by a green
2.
check mark in the Bluetooth field.
Tap the Device name, Visible, and Scan
3.
devices fields to set the options.
To change your Bluetooth name:
Verify Bluetooth is active.
1.
From the Bluetooth settings page, tap Device
2.
name.
Enter a new name.
3.
Tap OK to complete the rename process.
4.
To set visibility:
Verify your Bluetooth is active.
1.
From the Bluetooth settings page, tap Visible.
2.
Making your device visible allows other
devices to pair and communicate.
Note: Your device is visible for up to 120 seconds (2
minutes). This value appears as a countdown
within this field.
122
and then tap
To scan for Bluetooth devices:
Verify Bluetooth is active.
1.
From the Bluetooth settings page, tap Scan
2.
devices to search for visible external
Bluetooth-compatible devices such as
headsets, devices, printers, and computers.

Pairing Bluetooth Devices

The Bluetooth pairing process allows you to
establish trusted connections between your device
and another Bluetooth device. When you pair
devices, they share a passkey, allowing for fast,
secure connections while bypassing the discovery
and authentication process.
Note: Pairing between two Bluetooth devices is a
one-time process. Once pairing is established
the devices continue to recognize their
partnership and exchange information without
entering a passcode.
To pair your device with another Bluetooth device:
Verify Bluetooth is active.
1.
From the Bluetooth settings page, tap Visible.
2.
Your device must be visible to successfully
pair with an external device.
Tap Scan devices. Your device displays a list
3.
of discovered in-range Bluetooth devices.
Tap a device from the list to initiate pairing.
4.
Enter the passkey or PIN code, if needed, and
5.
tap OK.