Table of Contents
Advertisement
BASIC FUNCTIONS
Display operation
Adjustment of the angle of the display can be
done by pushing the "TILT" button. Each
push of the "TILT" button will tilt the display to
positions
,
,
and then back to
1
2
3
reverse order.
If the engine switch is set at OFF, the display
will automatically move back to position
The display will automatically resume the pre-
vious position when the engine switch is set
at ACC or ON.
20
CAUTION
Injury may result from placing a hand or
any fingers on the display while it is
moving.
NOTICE
Do not place any foreign objects on the
display while it is moving. It could dam-
age your navigation system.
INFORMATION
Under extremely cold conditions, the
display may react slowly or operation
sound may become louder.
in the
0
.
0
Initial screen
When the engine switch is set at ACC or ON,
the initial screen will be displayed and the
system will begin operating.
CAUTION
When the vehicle is stopped with the en-
gine running, always apply the parking
brake for safety.
After a few seconds, the "CAUTION" screen
will be displayed.
Advertisement
Table of Contents
