Pairing Bluetooth Devices - Samsung SPH-M920 User Manual

To change your Bluetooth name:
1.
Verify your Bluetooth is active.
2. From the Bluetooth settings page, tap
3.
Tap the
Device name
4.
Tap OK to complete the rename process.
To make your device visible:
1.
Verify your Bluetooth is active.
2.
From the Bluetooth settings page, tap
Making your device discoverable allows it to be
detected by other devices for pairing and
communication.
Note:
Your device is visible for up to 120 seconds
(2 minutes). This value appears as a countdown within
this field.
To scan for Bluetooth devices:
1.
Verify your Bluetooth is active.
2.
From the Bluetooth settings page, tap
devices to search for visible external Bluetooth-
compatible devices such as headsets, devices,
printers, and computers.
Device name
field and enter a new name.
Discoverable
Scan for

Pairing Bluetooth Devices

Paired Devices
.
The Bluetooth pairing process allows you to establish
trusted connections between your device and another
Bluetooth device. When you pair devices, they share a
passkey, allowing for fast, secure connections while
bypassing the discovery and authentication process.
To pair your device with another Bluetooth device:
.
1.
Verify your Bluetooth is active.
2.
From the Bluetooth settings page, tap
Your device must be visible to successfully pair
with an external device.
3.
Tap
Scan for devices
of discovered in-range Bluetooth devices,
page 128.)
4.
Tap a device from the list to initiate pairing.
5.
Enter the passkey or PIN code and tap
– or –
Tap Pair from the onscreen pairing options popup.
Discoverable
. (Your device will display a list
Done > OK
2J. Bluetooth
.
.
129