In-Call Options - Samsung Replenish SPH-M580 User Manual

In-Call Options

Once you initiate a call, you
will see six onscreen options.
Tap an option to select it.
to use the
Show dialpad
onscreen dialpad to enter
additional numbers, for
example, an extension or
access code.
Add call touch to initiate a
3-way call (page 140).
to end the current
End call
call.
to mute the microphone during an active call.
Mute
Tap again to unmute the microphone.
Note:
If Mute is activated, the speaker mode is deactivated.
Speaker to route the device's audio through the
speaker ( On ) or through the earpiece (
Activate to route the device's audio
Speaker
through the speaker. (You can adjust the speaker
volume using the volume buttons.)
Deactivate
Bluetooth
connected Bluetooth headset (
speaker (
When the call is routed to a Bluetooth headset,
the current call area shows the
icon (
Note:
When Bluetooth or the Bluetooth headset is
turned off, the call is routed through either the
earpiece or speaker and shows (
WARNING:
Off ).
Touch and drag up
onscreen dialpad to enter additional numbers, for
example, an extension or access code.
to use the device's earpiece.
Speaker
to route the device's audio through a
). (See "2J. Bluetooth" on page 124.)
Off
).
The Headset button is activated to show the current call
is routed to the connected Bluetooth headset.
To route the current call back to the device,
tap to temporarily use the device.
Bluetooth
Tap it again to route the call back to the
connected Bluetooth headset.
Because of higher volume levels, do not place
the device near your ear during speakerphone
use.
(
Dialpad
Dialpad Dialpad
2B. Making and Answering Calls
On ) or through the
call
Bluetooth
).
) to use the
55