Sending Contacts Via Bluetooth - Samsung Replenish SPH-M580 User Manual

3.
Tap . (Your device will display a list
Scan for devices
of discovered in-range Bluetooth devices.)
4.
Tap a device from the list to initiate pairing.
5.
Enter the passkey or PIN code and tap
6.
The external device will then have to also accept
the connection and enter your device's PIN code.
Once successfully paired to an external device,
appears within the Status area.
Note: Due to different specifications and features of other
Bluetooth-compatible devices, display and operations
may be different, and functions such as transfer or
exchange may not be possible with all Bluetooth-
compatible devices.
Note:
Pairing between two Bluetooth devices is a one-time
process. Once a pairing has been created, the devices
will continue to recognize their partnership and
exchange information without having to re-enter a
passcode again.
To disconnect a paired device:
Disconnecting a paired device breaks the connection
between the device and your Samsung Replenish™,
but retains the knowledge of the pairing. At a later point
.
OK
when you wish to reconnect the device, there is no
need to setup the connection information again.
1.
Verify your Bluetooth is active.
2.
From the Bluetooth settings page, touch and hold
the name of the previously paired device.
3.
Tap Unpair
Note:
Disconnections are manually done but often occur
automatically if the paired device goes out of range of
your Samsung Replenish™ or it is powered off.

Sending Contacts via Bluetooth

Depending on your paired devices' settings and
capabilities, you may be able to send pictures,
Contacts information, or other items using a Bluetooth
connection.
to confirm disconnection.
2J. Bluetooth 127