Advertisement
Shutting down
1) Save your data.
2) Check from reservation system when microscope has a next reservation.
3) Go to Configuration/Lasers and shut down any lasers not needed by the
next user within two hours.
4) Close LAS-AF software
5) Remove your sample and carefully clean the objective(s)
6) If no-one has a reservation within two hours of your reservation, turn off
the PC/Microscope and Scanner Power switches. Disable the lasers by
turning the key to Off-0 position. Wait until Argon laser cooler has stopped
before turning Laser Power switch off.
7) Check if the next person after you within 24 hours needs the microscope at
37 C and turn on the heating if needed.
Shut down computer if no one is coming within 2 hours, otherwise log off
8)
from windows.
2) Put a dish into the adapter.
3) Put a adapter with dish on a stage and put gas
chamber on with tubes attached to gas humidifier.
Advertisement
