Setting
Status
to
,
Display
brightness
*
*
Lighting
*
Temperature
to
control
Electrical
Version
*
Demo mode
* Factory default
Different levels of brightness can be selected for the
display.
: minimum brightness
: maximum brightness
The oven interior lighting is on for 15 seconds and then
turns off automatically.
The oven interior lighting is permanently turned on.
You can change the temperature in increments in all
operating modes so that it is higher or lower in the oven
compartment than displayed.
The higher the setting, the higher the oven temperature.
You can set the voltage variant: 208 V, 60 Hz
You can set the voltage variant: 220 V, 60 Hz
You can set the voltage variant: 240 V, 60 Hz
Select and press OK for approx. 4 seconds. Demo
mode is deactivated as soon as is shown briefly
in the display.
Select and press OK for approx. 4 seconds. Demo
mode is activated as soon as is shown briefly in
the display.
The oven can be operated, however the heating
elements will not work. Do not activate this setting for
domestic use.
Using the oven
33