Washing Machine; Purpose And Description Of The Product; Warning; Large Capacity - Saturn ST-WK 7601 Instruction Manual

GB

WASHING MACHINE

Dear Buyer!
We congratulate you on having bought the device under our trade name . We are sure
that our devices will become essential and reliable assistance in your housekeeping.
Set
Washing machine ................................. 1
Centrifuge safety lid ............................. 1
Instruction manual ............................... 1
Warranty book ..................................... 1
Package ................................................ 1

PURPOSE AND DESCRIPTION OF THE PRODUCT

 Washing Machine PMN-6,5D is intended for semiautomatic washing and spinning.
 Plastic housing:
Two tanks (tank for washing and tank for centrifuge) determine the design of the outer part of the
plastic housing. The arched design of the housing gives it nice and modern look.
 Intensive circulation of water:
Washing tank pulsator at the bottom of the machine has blades, which during washing create water
pressure in two vertical channel pumps. Water circulates from the bottom of the tank to the top,
creating a strong flow of water that moves in different directions. This help save washing time and
achieve better results.
 Large capacity:
A good choice for the whole family.
 Low level of noise:
Balanced operation, low noise washing.
 Fine hair filter:
Effectively removes hair during washing.
 Various water levels

WARNING

1. Do not let the machine work without water for more than 15-20 s.
2. Before using the new machine for the first time, turn clockwise an activator and the centrifuge
several times.
3. The temperature of water poured into the tank should not exceed 60˚C.
4. It is prohibited to heat water with a heater inside the tank.
5. Make sure not to get sand, foreign objects (coins, nails, etc.) into the tank. Contact with sand and
foreign objects causes damage to the inner surface of the tank, malfunction of activator and their
rapid wear-off.
6. After transportation of the product and staying in cold, sustain it at a temperature +18˚С to
+22˚С no less than 2 hours before the first switching on.
14