System Memory - Asus TUF GAMING B660-PLUS WIFI Manual

Hide thumbs Also See for TUF GAMING B660-PLUS WIFI:
Table of Contents

Advertisement

1.4

System memory

This motherboard comes with four Double Data Rate 5 (DDR5) Dual Inline Memory Module
(DIMM) sockets. The figure illustrates the location of the DDR5 DIMM sockets:
Recommended memory configurations
1-10
DIMM_A1
DIMM_A2
DIMM_B1
DIMM_B2
You may install varying memory sizes in Channel A and Channel B. The system
maps the total size of the lower-sized channel for the dual-channel configuration. Any
excess memory from the higher-sized channel is then mapped for single-channel
operation.
A DDR5 memory module is notched differently from a DDR, DDR2, DDR3 or DDR4
module. DO NOT install a DDR, DDR2, DDR3 or DDR4 memory module to the DDR5
slot.
12
Gen Intel
processors support DDR5 4800 natively.
th
®
The default memory operation frequency is dependent on its Serial Presence Detect
(SPD), which is the standard way of accessing information from a memory module.
Under the default state, some memory modules for overclocking may operate at a
lower frequency than the vendor-marked value.
For system stability, use a more efficient memory cooling system to support a full
memory load.
Always install DIMMs with the same CAS latency. For optimal compatibility, we
recommend that you install memory modules of the same version or date code (D/C)
from the same vendor. Check with the retailer to get the correct memory modules.
Refer to www.asus.com for the Memory QVL (Qualified Vendors Lists), and memory
frequency support depends on the CPU types.
Channel
Channel A
DIMM_A1 & DIMM_A2
Channel B
DIMM_B1 & DIMM_B2
Chapter 1: Product Introduction
Sockets

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents