Asus TUF GAMING B660-PLUS WIFI Manual page 12

1.2.1 Layout contents
1. CPU socket
The motherboard comes with a surface mount Intel
Intel Core™, Pentium
®
For more details, refer to Central Processing Unit (CPU).
2. DDR5 DIMM slots
The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed for DDR5
(Double Data Rate 5) memory modules.
For more details, refer to System memory.
3. Expansion slots
This motherboard supports two PCIe x16 graphics cards and one PCIe x1 network card,
SCSI card or other card that complies with the PCI Express specification.
4. Fan headers
The Fan headers allow you to connect fans to cool the system.
Header
CPU_FAN
CPU_OPT
AIO_PUMP
CHA_FAN1
CHA_FAN2
CHA_FAN3
5. Power connectors
These Power connectors allow you to connect your motherboard to a power supply. The
power supply plugs are designed to fit in only one orientation. Find the proper orientation and
push down firmly until the power supply plugs are fully inserted.
Ensure to connect the 8-pin power plug.
•
•
•
1-2
Gold and Celeron
®
Max.
Max. Power
Current
1A 12W
1A 12W
1A 12W
1A 12W
1A 12W
1A 12W
We recommend that you use a PSU with a higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
If you are uncertain about the minimum power supply requirement for your system, we
recommend you to refer to online resources for Power Supply Wattage Calculator.
If you want to use two high-end PCI Express x16 cards, use a PSU with 1000W power
or above to ensure the system stability.
Socket LGA1700 designed for 12
®
Processors.
®
Shared
Default Speed
Control
Q-Fan Controlled
Q-Fan Controlled
Full speed
Q-Fan Controlled
Q-Fan Controlled
Q-Fan Controlled
Chapter 1: Product Introduction
th
A
A
-
-
-
-
Gen