Table of Contents
Advertisement
17. Thunderbolt™ header
The Thunderbolt™ header allows you to connect an add-on
Thunderbolt™ I/O card that supports Intel
Technology, allowing you to connect Thunderbolt™-enabled
devices to form a daisy chain-configuration.
•
•
18. Q-LEDs
The Q-LEDs check key components (CPU, DRAM, VGA, and booting devices) during the
motherboard booting process. If an error is found, the critical component's LED stays lit up
until the problem is solved.
The Q-LEDs provide the most probable cause of an error code as a starting point for
troubleshooting. The actual cause may vary from case to case.
1.2.2
Rear panel connectors
1
8
1.
DisplayPort. This port is for a DisplayPort-compatible device.
USB 2.0 ports. These Universal Serial Bus (USB) ports are for USB 2.0 devices.
2.
3.
USB 3.2 Gen 1 (up to 5Gbps) ports. These Universal Serial Bus (USB) ports connect
to USB 3.2 Gen 1 devices.
4.
2.5G Ethernet port. This port allows 2.5Gbps Ethernet connection to a Local Area
Network (LAN) through a network hub. Refer to the table one the next page for the
Ethernet port LED indications.
1-6
The add-on Thunderbolt™ I/O card and
Thunderbolt™ cables are purchased separately.
Please visit the official website of your purchased
Thunderbolt card for more details on compatibility.
2
3
9
10
's Thunderbolt™
®
4
9
Chapter 1: Product Introduction
TB_HEADER
PIN 1
5
6
7
11
12
13 14
Hide quick links:
Advertisement
Table of Contents
