Advertisement
ASSEMBLY INSTRUCTIONS
Quadro Loop
2P Run workstation
Sizes: 1200, 1400, 1600, 1800 mm
STEP 01
Using Allen Key provided, attach 2 plastic brackets per leg (F)
(as per picture above) using M6x20MM (I) Socket head screw.
Do the same with Connector frame (D). Connect Loop Legs (C)
to Bottom of Quadro Legs (B) by using 4 bolts per leg
www.jasonl.com.au
Need help!
Call us on
1300 527 665
STEP 02
I
Using Allen Key provided, attach M8x20MM Socket head (H)-
screw socket half way into leg for both legs (B) and into
Connector frame (D).
H
Page 3 of 7
Advertisement
Need help?
Do you have a question about the Quadro Loop 2P Run workstation and is the answer not in the manual?