unotec KADOK II Manual page 12

Safety precautions
Important: Do not expose this product to rain or moisture to rain or
moisture to preserve the life of your product.
Caution: Do not disassemble this unit. To prevent this risk of electric
shock, do not remove cover.
Ventilation: The device should be situated so that its location or posi-
tion does not interfere with its proper ventilation. For example, the unit
should not be situated on a bed, sofa, rug or similar surface that may
block the ventilation openings.
Heat: The device should be situated away from sources of high heat
such as radiators or stoves.
Cleaning: We strongly suggest using a clean, dry, non-alcohol cotton
swab to clean the glass surface periodically to produce a clear image.
Non use period: The USB cord for the device should be unplugged from
the computer when the unit is left unused for a long period of time.
USB overloading: Do not overload the USB connections on your
computer. If you have too many devices connected to your computer
such as a wireless mouse, Media player, Mobile phone or other USB
powered devices. There may not be enough power for the film scanner
to operate properly.
Servicing: The user should not attempt to service the device beyond
those means described in the operating instructions. All other servicing
should be referred to qualified person.
Film Holder: The design of film holder is follow ISO standard.
In some cases the holes on the film will not match exactly to alignment
of the holder. This is caused by a non-standard camera. In this case,
there will be a small black line on the edge of the frame that can easily
be cropped out using photo editing software.
ISO-international Organization for Standardization
Package contents
Film scanner
USB cable
Video cable
Negative Film holder
Positive slide holder
DC5V adapter
User's Manual
Brush
NOTE: You can use the provided brush to clean the backlight panel
Place the film scanner on the side and insert the end of the brush into
12 english