Olympus DS-2 Online Instructions Manual page 62

Assigning Folder Names (FOLDER NAME)
Recorder buttons that are used to input characters
Button
MENU/SET Press once
Press and hold
L
Press once
Press and hold
M
Press once
Press and hold
REW Press once
ERASE ----------
5
FF Press once
Press and hold
PLAY Press once
Press and hold
6
Use the two following methods to quickly find characters.
1 When the FF button is pressed, the displayed character group (example: Uppercase,
lowercase, template, symbols) will change, and you can then press the 2 or 3 buttons
to select characters.
2 Every time the PLAY button is pressed, it will skip ahead by 5 characters, so you can
quickly move closer to the character you want.
(Currently displayed character) = (Space) = DICT. = TO DO = A = F = K = P = U =
Z = a = f = k = p = u = z = 1 = 6 = , = ( = # = ^ = (Space) = DICT. = TO DO...
If you press the PLAY button while a character other than one of the above appears, you will skip to the
closest forward character in the above cycle.
Pressing the PLAY button again will then cycle through every fifth character as shown above.
example:
If you press the PLAY button while "MEMO" is displayed, "TO DO" will appear.
If you press the PLAY button while "B" is displayed, "F" will appear.
62
Push
To input the selected character and advance the input position.
Confirms folder name or file comment.
Forward to next character in the character list.
Scroll forward through the character list.
Backward to previous character in the character list.
Scroll backward through the character list.
Returns to previous character.
To delete the flashing character.
Switches between character groups (type).
Quickly cycles through the character groups (types).
Selects character to be input: skips ahead by 5 characters.
Quickly skips ahead in increments of 5 characters.
Action