Panasonic ES7058S Operating Instructions Manual page 5

Charging with the self-cleaning recharger
Thoroughly wipe off any drops of water on or around the recharger so that it is dry before charging it.
You can charge without the recharger.
Attach the detergent
cartridge and the
water tank to the
self-cleaning
recharger.
Page 7
Insert the appliance
plug.
Plug in the adaptor.
Page 6
Pull up the arm until it
clicks.
Remove the protective
cap and then attach
the shaver.
• Turn the shaver off before
attaching.
• Check that the outer foil is not
deformed or damaged when you
are attaching the shaver.
Push down the arm
until it clicks.
• The charge status lamp glows
and charging starts.
• Charging is completed when the
charge status lamp blinks.
(Max. 1 hour later)
• You can keep the shaver attached to the recharger, or
connected to the adaptor, when not using it to maintain full
battery capacity. You cannot overcharge the shaver.
• A special plug adaptor may be required in some areas.
5