Kohler Flipside 15704T Installation Instructions

INSTALLATION INSTRUCTIONS
安装说明书
15704T
安装之前
所有的资料是按最新出版的产品资料编写而成。科
勒公司保留任何时候不经通知即可改变产品特性、
包装或产品可供类型的权利。
说明书包括重要的安装、保养及清洁方面的内容，
请把这些资料交给用户阅读。
注意事项：
1.一定要先彻底冲洗供水管以清除管道中的杂质。
2.切断供水管路。
3.遵守所有当地安装及建筑条例 。
4.花洒臂最大承重1KG。
5.花洒臂所接花洒最大直径不超过10˝。
6.花洒臂最高工作温度及环境温度：60ºC。请特别
注意花洒同花洒连接的臂管须远离浴霸，否则可能
损坏本产品，甚至对使用者造成伤害。
安装尺寸
45
1184923-2-C
Articulating Shower Arm
花洒臂
BEFORE YOU BEGIN
All information is based on the latest product
information available at the time of publication.
Kohler Co. reserves the right to make changes in
product characteristics, packaging, or availability at
any time without notice.
Please leave these instructions for the consumer.
They contain important information.
NOTES:
1. Flush the water supply pipes thoroughly to remove
debris.
2. Shut off the water supplies to the fitting.
3. Observe all local plumbing and building codes.
4. Shower arm holds 1KG maximum.
5. The shower head on the shower arm should not
exceed Ø10˝.
6. The highest water and environment temperature is
60ºC. Please keep shower head and the shower arm
away from heater, or it may become damaged and
cause injury to the user.
ROUGH-IN DIMENSIONS
(90º)
242
(60º)
(120º)
1