Table of Contents
Advertisement
NetPing server room environmental monitoring solutions and IP power distribution units.
Step 2.
Open to the web interface of the monitoring device / IP PDU to start the configuration. The sensor settings in the device's web interface are
specified in the firmware description, the section "Working with Channels of Discrete Input-Output" for the corresponding model
etpingdevice.com/
.
Sensor Connection Diagrams
The sensor output is a dry contact. The connection order of the N-NC or N-NO wires is not important.
NetPing 2/PWR-220 v3/ETH, NetPing 2 IP PDU ETH 53R14, NetPing 2 IP PDU GSM3G 203R15
NetPing 2/PWR-220 v3/ETH —
NetPing 2 IP PDU ETH 53R14 —
NetPing 2 IP PDU GSM3G 203R15 —
Copyright © NetPing east Co., Ltd / E-mail:
http://www.netpingdevice.com/products/netping-2-pwr-220-v3-eth
http://www.netpingdevice.com/products/netping-2-ip-pdu-eth-53r14
http://www.netpingdevice.com/products/netping-2-ip-pdu-gsm3g-203r15
support@netpingdevice.com www.netpingdevice.com
/
/ Phone: +886-2-23121582
here: http://docs.n
Advertisement
Table of Contents
