Dv/Digital8 Dubbing; Before Dv/Digital8 Dubbing - Sony RDR-GX330 Service Manual

To add the entire title to the Playlist title
Combining multiple Playlist
as one scene (Make a Playlist)
titles (Combine Titles)
1
Press TITLE LIST. If the Title List
(Playlist) appears, press ,.
-RW
2
Select the title and press ENTER.
1
The sub-menu appears.
3
Select "Make a Playlist," and press
ENTER.
2
The selected title is added to the Title List
(Playlist).
The title name is the same as the Original
title name.
3
To play the Playlist title
1
Press TITLE LIST. If the Title List
(Original) appears, press <.
2
Select a title, and press ENTER.
The sub-menu appears.
3
Select "Play," and press ENTER.
Moving a Playlist title (Change
Order)
4
-RW -R
VR VR
You can change the Playlist title order within
the Title List (Playlist).
5
1
Press TITLE LIST.
If the Title List (Original) appears, press
<
.
2
Press OPTIONS to select "Change
Order," and press ENTER.
6
3
Select the title you want to move, and
press ENTER.
z Hint
4
Select a new location for the title After titles are combined, the title name is the title
using M/m, and press ENTER. name of the first title prior to combination.
The title moves to the new location. b
Note
• To move more titles, go to step 3.
When the number of chapters in the title to be
• To finish, select "Quit," and press
combined exceeds the limit, the chapters at the end
ENTER. are combined into a single chapter.
64
b
Notes
• You cannot make a recording while DV dubbing.

DV/Digital8 Dubbing

• The DV IN jack is for input only. It will not
output signals.
• You cannot use the DV IN jack when:
Before DV/Digital8
– signal input to the DV IN jack on the front panel
or recorder operation cannot be performed
Dubbing
correctly when using a digital video camera
(see "About i.LINK" on page 90). Connect the
camera to the LINE IN jack and follow the
This section explains dubbing with a digital
instructions of "Recording from connected
video camera via the DV IN jack on the front
equipment without a timer" on page 48.
panel. If you want to dub by way of the LINE
– the input signal is not in DVC-SD format. Do
IN jacks, see "Recording from connected
not connect a MICRO MV format digital video
equipment without a timer" on page 48.
camera even if it has an i.LINK jack.
The DV IN jack on this recorder conforms to
– the images on the tape contain copy protection
the i.LINK standard. signals, which limit recording.
• If you want to play the disc on other DVD
Follow the instructions in "Preparing for DV/
equipment, finalize the disc (page 35).
Digital8 dubbing," and then move on to the
section on dubbing. For more information
Hookups
about i.LINK, see "About i.LINK" on
page 90.
Preparing for DV/Digital8
dubbing
You can connect a digital video camera to the
DV IN jack on the recorder to record or edit
from a DV/Digital8 format tape. Operation is
straightforward because the recorder will fast
forward and rewind the tape for you – you do
not need to operate your digital video camera.
Do the following to start using the "DV/D8
Edit" functions of this recorder.
See the instruction manual supplied with the
digital video camera as well before
connecting.
z Hint
If you plan to do additional editing on a disc after
the initial dub, use the DV IN jack and record on a
DVD-RW/DVD-R (VR mode).
1
2
66
All manuals and user guides at all-guides.com
-R
VR VR -RW
Press TITLE LIST.
You can divide a Playlist title.
If the Title List (Original) menu appears,
1
<
press .
Press OPTIONS to select "Combine
Titles," and press ENTER.
2
The display for selecting titles appears.
Select a title, and press ENTER.
3
A number indicating the order in which
you selected the title appears.
To cancel the selection, press ENTER
again.
Repeat step 3 to select all of the titles
you want to combine.
To cancel all of the selections, select
"Reset."
4
Select "OK," and press ENTER.
The list of titles to be combined appears.
To change the selection, select "Change"
and go to step 3.
5
6
Select "OK," and press ENTER.
The titles are combined.
z Hint
After a title is divided, the title name prior to
division is assigned to both the first and second
parts.
3
4
5
DVD recorder
to DV IN
i.LINK cable (not supplied)
DV output
6
Digital video camera
: Signal flow
Insert a disc.
z Hint
See "1. Inserting a Disc" on page 27.
You can turn off the recorder during dubbing. The
Insert the source DV/Digital8 format
recorder completes dubbing even after being turned
tape into your digital video camera.
off.
For the recorder to record or edit, your
digital video camera must be set to video
playback mode.
1-16
Dividing a Playlist title (Divide
Title)
-R
VR VR
Press TITLE LIST.
If the Title List (Original) appears, press
<
.
Select a title, and press ENTER.
The sub-menu appears.
Select "Divide Title," and press
ENTER.
The display for setting the dividing point
appears, and the title starts to play.
• To return to the beginning of the title,
press X PAUSE and then press
. PREV.
Select the dividing point by pressing
m/M, and press ENTER.
Playback pauses.
Press ENTER if the dividing point is
correct.
If the dividing point is incorrect, select
the dividing point using c/C, and
press ENTER.
The display asks for confirmation.
• To change the dividing point, press M.
Select "OK," and press ENTER.
The title is divided in two.
b
Press INPUT SELECT on the remote Notes
• You cannot connect more than one piece of
repeatedly to select "DV."
digital video equipment to the recorder.
The front panel display changes as
• You cannot control the recorder using another
follows:
device or another recorder of the same model.
• You cannot record date, time, or the contents of
channel
the cassette memory onto the disc.
• If you record from a DV/Digital8 format tape that
is recorded in multiple sound tracks, such as a
tape with multiple sampling frequencies (48 kHz,
Press REC MODE on the remote
44.1 kHz, or 32 kHz), no sound or an unnatural
repeatedly to select the recording
sound will be output when playing back the
sampling frequency switch point on the disc.
mode.
• In order to use this recorder's "Auto Chapter"
The recording mode changes as follows:
setting (page 68), be sure to correctly set the clock
on your digital video camera before shooting.
• The recorded picture may be momentarily
affected or the start and end points of a program
may be different from what you have set if the
For details about the recording mode, see
source DV/Digital8 format tape is in any of the
page 39. following conditions. In this case, see "Recording
from connected equipment without a timer"
Press OPTIONS on the remote to
(page 48).
select "DV / D8 Audio Input," and
– There is a blank space in the recorded portion of
press ENTER. Then, select the setting the tape.
– The tape's time code is not sequential.
for the audio input.
– If the picture size or the recording mode on the
"Stereo1" (default): Records original
tape being dubbed changes.
sound only. Normally select this when
dubbing a DV format tape.
"Mix": Records both stereo 1 and 2.
"Stereo2": Records additional audio
only.
Select "Mix" or "Stereo2" only if you
have added a second audio channel when
recording with your digital video camera.
You are ready to start dubbing. Select
one of the dubbing methods on the
following pages.
Adjust the dubbing picture quality and
size.
Before dubbing starts, press OPTIONS
to select "Rec Settings," and adjust the
recording settings (page 42).
65
67