Table of Contents
Advertisement
5. Select the appropriate camera from the menu; for the IMX390 D3 Rugged Camera Module,
select option a and press Enter .
6. Next select Whether Lens Distortion Correction (LDC) is enabled by selection 1 (Enable) or 0
(Disable) as shown in Figure 9 (below).
Figure 7. Vision SDK menu and demo options
DesignCore® RVP-TDA4Vx Development Kit ▪ Quick Start Guide
Document No. 00C-255 ▪ Version 1.0 ▪ Release Date: 9/9/20
CONFIDENTIAL ▪
D3Engineering.com ▪ 585.429.1550
8
9
Advertisement
Table of Contents
