Figure 9. Ldc Enable/Disable Menu; Figure 10. Number Of Cameras; Figure 11. Multi Camera Demo Menu - D3 DesignCore RVP-TDA4V Series Quick Start Manual

7. Select the number of cameras you are using.
Note: Cameras be plugged into the lowest-number ports. If you have two cameras, for example,
use VIN1 and VIN2.
8. The application will now start. After a few seconds, video will appear on the connected
DisplayPort Monitor, followed by the application menu.
9. Selecting option p will print to screen various performance and framerate statistics of the
system; selecting s will save one raw image from each channel to the SD card.

Figure 9. LDC enable/disable menu

Figure 10. Number of cameras

Figure 11. Multi Camera Demo menu

DesignCore® RVP-TDA4Vx Development Kit ▪ Quick Start Guide
Document No. 00C-255 ▪ Version 1.0 ▪ Release Date: 9/9/20
CONFIDENTIAL ▪
D3Engineering.com ▪ 585.429.1550
10