Table of Contents
Advertisement
2. Log into the system by typing root and pressing Enter .
3. Navigate to the vision_apps directory and start the multi-camera demo:
# cd /opt/vision_apps
# ./vision_apps_init.sh
# ./run_app_multi_cam.sh
4. Startup text for the multi-camera capture application will appear, followed in a few seconds by
the camera selection menu; see Figure 7 (below).
Figure 6. Login screen and Vision SDK demo startup
DesignCore® RVP-TDA4Vx Development Kit ▪ Quick Start Guide
Document No. 00C-255 ▪ Version 1.0 ▪ Release Date: 9/9/20
CONFIDENTIAL ▪
D3Engineering.com ▪ 585.429.1550
8
Advertisement
Table of Contents
