Table of Contents
Advertisement
7. Build the SDK:
# ./build.sh
Note: If you have not already initialized your SD card, complete that task by following the steps in
Section 6.0 Creating an SD card from Prebuilt
8. Install your newly built binaries:
# cd ti-processor-sdk-rtos-j721e-evm-07_02_00_06/vision_apps
# make linux_fs_install_sd
If you get access errors during this procedure, change the owner and group ids of the sd card
content by using the command chown as follow:
sudo chown –R <user_id>:<group_id> /media/<user_id>/rootfs
Where <user_id> and <group_id> are your login id and group id on the Linux desktop.
Note: For future incremental builds, D3 recommends building from the folder: ti-processor-sdk-rtos-
j721e-evm-07_02_00_06/vision_apps.
8.0 Additional Information
Additional software information from TI can be found inside the software release at ti-processor-sdk-
rtos-j721e-evm-07_02_00_06/vision_apps /docs/user_guide .
For additional camera and cables, contact D3Engineering.
9.0 Reference Documentation
Document
DesignCore®
RVP-TDA4Vx
Reference Design
Technical Reference
Manual
Vision Apps User
Guide
Description
Complete Technical
Reference Manual for RVP-
TDA4Vx Development Kit
Texas Instruments Vision
Apps Documentation
DesignCore® RVP-TDA4Vx Development Kit ▪ Quick Start Guide
Document No. 00C-255 ▪ Version 1.0 ▪ Release Date: 9/9/20
Binaries.
Location
Documents/
ti-processor-sdk-rtos-j721e-evm-
07_02_00_06/vision_apps/docs/user_guide/00
0__main__page_8md.html
CONFIDENTIAL ▪
13
D3Engineering.com ▪ 585.429.1550
Advertisement
Table of Contents
