Nokia xx Get Started

Get Started
Nokia xx
TA-1205/TA-1216
1. Insert the SIM and memory
card
1. Put your fingernail in the seam between the back
cover and the display, bend the back cover open,
and remove it.
2. Slide the nano-SIM in slot 1 with the contact area
face down. If you have a dual-SIM phone, slide the
second SIM in slot 2.
3. If you have a microSD memory card, slide the
card in the memory card slot.
4. Put back the back cover.
Use only original nano-SIM cards. Use of
incompatible SIM cards may damage the card or the
device, and may corrupt data stored on the card.
Use only compatible memory cards approved for
use with this device. Incompatible cards may
damage the card and the device and corrupt data
stored on the card.
Important: Do not remove the memory card
when an app is using it. Doing so may damage the
memory card and the device and corrupt data
stored on the card.
Note: Switch the device off and disconnect the
charger and any other device before removing any
covers. Avoid touching electronic components while
changing any covers. Always store and use the
device with any covers attached.
711608035321 V1.0
xxxxxxxxxx
Camera
Flash
Loudspeaker
Microphone
EN
Both SIM cards are available at the same time when
the device is not being used, but while one SIM card
is active, for example, making a call, the other may
be unavailable.
Headset connector
The Google Assistant/
Google Search key*
USB connector
*The Google Assistant is not available in certain
languages and countries. Where not available, the
Google Assistant is replaced by Google Search. Check
availability at https://support.google.com/assistant.
2. Charge the battery and switch
Front camera
Earpiece
Volume keys
Power/Lock key
the phone on
Plug a compatible charger into a wall outlet, and
connect the cable to your phone. Your phone
supports the USB micro-B cable. You can also
charge your phone from a computer with a USB
cable, but it may take a longer time.
If the battery is completely discharged, it may take
several minutes before the charging indicator is
displayed.
To switch your phone on, press and hold the power
key until the phone vibrates. The phone guides you
through the setup.
For an online user guide and troubleshooting help,
go to www.nokia.com/mobile-support.
Proximity
sensor