Nokia xx Get Started

Get Started
Nokia xx
TA-1214
1. Insert the SIM and memory
card
1. Open the SIM card tray: push the tray opener pin
in the tray hole and slide the tray out.
2. Put the nano-SIM in slot 1 on the tray with the
contact area face down. If you have a dual-SIM
phone, put the second SIM in slot 2.
3. If you have a memory card, put it in the memory
card slot.
4. Slide the tray back in.
Use only original nano-SIM cards. Use of
incompatible SIM cards may damage the card or the
device, and may corrupt data stored on the card.
Use only compatible memory cards approved for
use with this device. Incompatible cards may
damage the card and the device and corrupt data
stored on the card.
Important: Do not remove the memory card
when an app is using it. Doing so may damage the
memory card and the device and corrupt data
stored on the card.
Both SIM cards are available at the same time when
the device is not being used, but while one SIM card
is active, for example, making a call, the other may
be unavailable.
711608029461 V1.0
xxxxxxxxxx
Loudspeaker
EN-LATAM
Camera
Flash
USB connector
Microphone
Front camera
SIM and memory card
slot
Google Assistant/
Google Search
key*
Power/Lock key
*The Google Assistant is available in selected markets
and languages. Where not available, the Google
Assistant is replaced by Google Search. Check
availability at https://support.google.com/assistant.
2. Charge the battery and switch
the phone on
Plug a compatible charger into a wall outlet, and
connect the cable to your phone. Your phone
supports the USB micro-B cable. You can also
charge your phone from a computer with a USB
cable, but it may take a longer time.
If the battery is completely discharged, it may take
several minutes before the charging indicator is
displayed.
To switch your phone on, press and hold the power
key until the phone vibrates. The phone guides you
through the setup.
For an online user guide and troubleshooting help,
go to www.nokia.com/mobile-support.
Earpiece
Headset
connector
Volume keys