Remington RM300-PH Operator's Manual page 9

HOLDING THE UNIT
WARNING:
Always wear eye, hearing, hand, foot and
body protection to reduce the risk of injury when operating
this unit.
• Hold the rear handle with one hand. Keep that arm slightly bent.
• Hold the front handle with the other hand. Keep that arm straight.
USING THE POWER CONTROL BUTTON
The power control button allows the operator to switch between
Boost and Eco modes, as needed:
• Boost mode provides maximum power for tough jobs.
• Eco mode conserves energy for maximum run time. Eco mode
is appropriate for most jobs.
Press the power control button forward for Boost mode. Press the
power control button backward for Eco mode. The power control
button will stay in the mode selected without the need to hold the
button in place.
WARNING:
To prevent serious injury, never perform
maintenance on the unit while it is running. Always remove
the battery to prevent the unit from starting accidentally.
Always allow the unit to cool before maintaining the unit.
Before maintaining the battery charger, always unplug it
from the power outlet.
MAINTAINING THE BATTERY CHARGER
• Keep the battery charger clean and clear of debris. Do not allow
foreign material into the charging dock or onto the terminals (Fig. 7).
Inspect the battery charger for foreign material before each use.
• Make sure the charger has not been shorted by debris. Inspect
the terminals for soot and signs of melting. Do not attempt to
use a shorted charger.
MAINTENANCE
Charging Dock
9
Power Control Button
Boost
Fig. 6
Terminals
Fig. 7
Eco