Remington RM300-PH Operator's Manual page 6

WARNING:
Only use RM300 series attachments with
this unit. Using other attachments could result in personal
injury and damage to the unit.
WARNING:
Before using any attachment, read and
understand the manual that came with the attachment.
Follow all safety information contained within.
WARNING:
To avoid serious personal injury and
damage to the unit, shut the unit off before removing or
installing an attachment.
INSTALLING THE ATTACHMENT
Refer to the attachment operator's manual for specific assembly
instructions.
ASSEMBLING THE BATTERY CHARGER
1. Plug the power cord into the AC adapter (Fig. 1).
NOTE: The battery charger can be mounted to a permanent surface,
such as a wall or work bench. Use mounting fasteners (not
included) capable of supporting the combined weight of the
battery and battery charger. Keep the AC adapter horizontal and
firmly supported. Do not allow the AC adapter to hang or dangle.
ASSEMBLY
AC Adapter
6
Power Cord
Fig. 1