Advertisement
Quick Links
John Lewis
Darton Bedstead 90cm Soft White/Grey
Single
Thank you for purchasing this Darton Bedstead. Please read the instructions carefully before use to
ensure safe and satisfactory operation of this product.
PRE-ASSEMBLY PREPARATION
Please ensure instructions are read in full before attempting to assemble this product.
Necessary Tools
Please check the pack contents before attempting to assemble this product. A full checklist of components is
given in this leaflet. If any components are missing, please contact the John Lewis Helpline.
This product is HEAVY. It should be assembled as near as possible to the point of use. TAKE CARE WHEN
LIFTING to avoid personal injury and (or) damage to the product.
This product takes approximately 45 MINUTES to assemble with 2 PEOPLE.
The fittings pack contains SMALL ITEMS which should be KEPT AWAY FROM YOUNG CHILDREN.
Read this leaflet in full before commencing assembly.
This bed is not designed to be dismantled for storage or transportation after assembly.
If you require any additional information or have any issues with this product please call the
John Lewis Helpline on 01244 689949 or email mail@fwgroup-uk.com
Stock code soft white: 803/44204
Stock code grey: 803/43304
For product support or spare parts please call
the John Lewis Helpline;
E: mail@fwgroup-uk.com
T: 01244 689949
1
Advertisement
Related Manuals for John Lewis 803/44204
Summary of Contents for John Lewis 803/44204
- Page 1 Please check the pack contents before attempting to assemble this product. A full checklist of components is given in this leaflet. If any components are missing, please contact the John Lewis Helpline. This product is HEAVY. It should be assembled as near as possible to the point of use. TAKE CARE WHEN LIFTING to avoid personal injury and (or) damage to the product.
- Page 2 Fittings and parts checklist Fittings Cam x 2 Allen Key - 4mm x 1 ( 12 x 10.5 mm) Bolt x 2 Bolt x 8 (M8 x 22 mm) (M6 x 24 mm) Dowel x 3 Screw x 24 10 x 30 mm) (30 mm) Parts Headboard x 1...
- Page 3 Step by step assembly instructions Step One Screw the Bolts (E) into the holes indicated on the Top Rail (3). x 2 pcs Step Two Place the Dowels (F) into the holes in the Headboard (1) and press down the Top Rail (3) onto the Headboard (1).
- Page 4 Step Three Fix the Side Rails (4) to the Headboard (1) and Footboard (2) using Bolts (B) as shown below. Tighten using Allen Key (A). & x 8 pcs...
- Page 5 Step Four Place one of the Slats (5) at the top of the Headboard then slide the rest down the bed until the last one reaches the Footboard, ensuring the end Slats are as close to the Headboard and Footboard as possible. Fix all Slats (5) in place using Screws (C).
-
Page 6: Care And Maintenance
Care and Maintenance Wood furniture Wood displays different grain patterns depending on which way they cut - for example, the ‘medullary ray’ which can appear on oak furniture is a mark of good quality timber - these are just characteristics of the natural beauty of the wood. -
Page 7: Safety Instructions
If you need any additional information or have any issues with this product please call the John Lewis helpline on 01244 689949 or email mail@fwgroup-uk.com This bed is for use with a standard single size mattress L190 x W90 x H18.