Table of Contents
Advertisement
Using your notebook
5
In the Select Profile area, enter a Profile Name in the Profile Name text box and choose Access Point
in the Network Type drop-down box.
6
Click Next.
The Edit Configuration dialog box appears.
7
In the Identify your network area, enter your network name in the Network Name text box if you
know it or click Scan to find one available access point.
If you clicked Scan, the Scan for Network Names dialog box appears. Click the appropriate Access
Point and click the OK button.
8
Select the Enable data security check box in the Set Security area if the access point was set up with
an encryption key, and select either alphanumeric characters or hexadecimal, depending on your
encryption key.
9
Fill in the Network key. Type your key (5 last digits of the access point name) in the first box, and make
sure Key 1 is selected near the bottom of the dialog box. If you wish to select another key number, select
it in the Encrypt data with drop-down box.
10
Click Next.
11
In the Power Management area, select the Off check box if you wish to keep the default power
consumption and high performance or select the On check box to lower the power consumption.
12
Click Next.
13
In the TCP/IP Behavior area, select the Renew IP Address when selecting this profile check box and
click Finish.
14
Click OK in the Add/Edit Configuration Profile dialog box.
After 30 seconds, the connection is established.
For more information on Wireless LAN, read the Wireless LAN Regulations flyer.
n N
52
Advertisement
Table of Contents
