Sony VAIO PCG-R600HMP User Manual
Sony VAIO PCG-R600HMP User Manual

Sony VAIO PCG-R600HMP User Manual

Hide thumbs Also See for VAIO PCG-R600HMP:

Advertisement

Quick Links

N
Sony Notebook User Guide
P C G - R 6 0 0 H M P D / P C G - R 6 0 0 H M P

Advertisement

Table of Contents
loading

Summary of Contents for Sony VAIO PCG-R600HMP

  • Page 1 Sony Notebook User Guide P C G - R 6 0 0 H M P D / P C G - R 6 0 0 H M P...
  • Page 2: Read This First

    Macrovision Corporation. Reverse engineering or disassembly is prohibited. Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein is governed by the terms of a separate user licence agreement.
  • Page 3 All other trademarks are trademarks of their respective owners. ® NERGY ® As an E Partner, Sony has determined that this product meets the E NERGY T AR The International E NERGY of computers and their office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption.
  • Page 4: Safety Information

    Safety information Owner's record The serial number and model number are located on the bottom of your Sony notebook. Record the serial number in the space provided here. Refer to the model number and serial number if you call VAIO-Link.
  • Page 5 Read this first ❑ Magnets ❑ Magnetic bracelets. Audio/video ❑ Audio and picture distortion may occur if this equipment is positioned in close proximity to any equipment emitting electromagnetic radiation. Connectivity ❑ Never install modem or telephone wiring during a severe lightning storm. ❑...
  • Page 6: Regulatory Information

    Read this first Regulatory information Sony hereby declares that the product is in compliance with the essential requirements and other relevant provisions of European Directive 1999/5/EC (radio equipment and telecommunications terminal equipment Directive). This product complies with EN 55022 Class B and EN 55024 for use in following areas: residential, commercial and light-industrial.
  • Page 7 Read this first Disposing of lithium ion batteries ❑ Do not handle damaged or leaking lithium ion batteries. Dispose of promptly and properly. ❑ Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer.
  • Page 8 ❑ Portability - The rechargeable battery pack provides hours of use without AC power. ❑ Sony audio and video quality - A high-resolution LCD screen enables you to take advantage of today’s advanced multimedia applications, games, and entertainment software. ❑...
  • Page 9: Documentation Pack

    ❑ A Troubleshooting Guide, where you can find all the basic information you need to start using your notebook, as well as troubleshooting and VAIO-Link information; ❑ Your Sony Guarantee conditions; ❑ A Safety Regulations leaflet; ❑ A Wireless Lan Regulations leaflet;...
  • Page 10 Welcome Refer to your Software Guide for information on the bundled software and the Sony applications. ❑ About the Software on your computer is a short description of the features of the software pre- installed on your system. ❑ Using Video software explains how to use Sony video software: DVgate, MovieShaker and Smart Capture.
  • Page 11 Welcome Your notebook and its accessories The following hardware items are in the box: main unit rechargeable battery pack product recovery CD-ROMs documentation pack AC adapter ✍ * The phone plug and cable are used for connecting the modem. If there is an extra phone plug inside the box, please refer to Using the correct phone plug (page power cord...
  • Page 12: Ergonomic Considerations

    Welcome Ergonomic considerations You will be using your notebook as a portable device in a variety of environments. Whenever possible, you should attempt to take account of the following ergonomic considerations to both stationary and portable environments. ❑ Position of your computer – Place the computer directly in front of you (1). Keep your forearms horizontal (2), with your wrists in a neutral, comfortable position (3) while using the keyboard, touchpad, or external mouse.
  • Page 13 Welcome ❑ Viewing angle of the computer’s display – Use the display’s tilting feature to find the best position. You can reduce eye strain and muscle fatigue by adjusting the tilt of the display to the proper position. Adjust the brightness setting of the display as well. ❑...
  • Page 14: Table Of Contents

    Using your notebook Using your notebook This section describes how to start using your computer and how to use your computer’s internal and external devices. ❑ Locating controls and connectors ❑ Connecting a power source ❑ Starting your notebook ❑ Shutting down your notebook ❑...
  • Page 15: Locating Controls And Connectors

    Using your notebook Locating controls and connectors Right USB connector (page 75) Headphone connector (page 74) Microphone connector (page 74) S400 i.LINK™ connector (page 78) DC Out Monitor connector (page 69) Ethernet network (page 83) connector Phone line jack (page 49)
  • Page 16 Using your notebook Left DC In USB connector Ventilation slot (page 18) MagicGate Memory Stick™ slot (page 75) PC Card slot (page 40) (page 38)
  • Page 17 Using your notebook Front hard disk drive indicator Num Lock indicator Caps Lock indicator Scroll Lock indicator LCD screen power switch keyboard touchpad power indicator battery indicator Memory Stick™ indicator docking station indicator Wireless LAN indicator Wireless LAN switch left/right buttons Jog Dial™...
  • Page 18 Using your notebook Back battery connector Bottom battery lock lever battery release lever (page 19) (page 19) docking connector (page 19) reset switch (page 60)
  • Page 19: Connecting A Power Source

    Using your notebook Connecting a power source You can use either an AC adapter or a rechargeable battery pack as a power source. Using the AC adapter To use the AC adapter, proceed as follows: Plug the cable attached to the AC adapter (1) into the DC In connector (2) on the computer. Plug one end of the power cord (3) into the AC adapter.
  • Page 20: Using The Battery Pack

    Using your notebook Using the battery pack You can use a battery pack as a source of power. The battery pack supplied with your computer is not fully charged at the time of purchase. Inserting the battery pack To insert the battery, proceed as follows: Move the lock lever (1) on the bottom of the computer to the Unlock position.
  • Page 21 Using your notebook Charging the battery pack To charge the battery pack, proceed as follows: Connect the AC adapter to the computer. Insert the battery pack. The computer automatically charges the battery (the battery indicator light flashes in a double blink pattern as the battery charges).
  • Page 22 Using your notebook Removing the battery pack To remove the battery pack, proceed as follows: Turn off the computer and close the cover. Slide the lock lever (1) to the Unlock position. Slide the release lever (2) to the Unlock position and slide the battery away from the computer. ✍...
  • Page 23: Starting Your Notebook

    Using your notebook Starting your notebook To start your computer, proceed as follows: Slide the LCD lock lever (1) in the direction of the arrow, and lift the cover. Press the power switch (2) of the computer until the green power indicator (3) light turns on. If necessary, press <Fn>+<F5>...
  • Page 24: Shutting Down Your Notebook

    Using your notebook Shutting down your notebook It is important that you shut down your computer properly so you do not lose unsaved data. To shut down your computer, proceed as follows: Click the Start button. Click Turn Off Computer. The Turn off computer screen appears.
  • Page 25: Using The Keyboard

    Using your notebook Using the keyboard Your keyboard is very similar to a desktop computer’s, but the keyboard has additional keys that perform specific notebook-related tasks. If you bought your notebook in the UK, your keyboard has the following layout:...
  • Page 26 Using your notebook If you bought your notebook in Switzerland, your keyboard has the following layout:...
  • Page 27 Using your notebook Keys Escape key (1) Function keys (2) Print Screen key (3) Correction keys (4) <Fn> key (5) Navigation keys (6) Application key (7) Numeric keypad area (8) Operator keys (9) ® Windows key (10) Descriptions The <Esc> (Escape) key is used to cancel commands. The twelve function keys along the top of the keyboard are used to perform designated tasks.
  • Page 28 Using your notebook Combinations and functions with the <Windows> key Combinations + <F1> + <Tab> + <E> + <F> + <Ctrl> + <F> + <M> <Shift> + + <M> + <R> <Fn> + + <Insert> Functions Displays Help and Support Center. Switches the selected button on the taskbar.
  • Page 29 Using your notebook Indicators Indicator Power Battery Memory Stick™ Docking station Light Hard disk Num Lock Caps Lock Scroll Lock Functions Power on: lights green. Standby mode: flashes umber. Hibernate mode: turns off. Indicates the status of the battery inserted in the computer. Turns on when the Memory Stick™...
  • Page 30 Using your notebook Combinations and functions with the <Fn> key Combinations/ Feature <Fn> + (ESC): Standby <Fn> + (F3): speaker switch <Fn> + (F4): speaker volume <Fn> + (F5): brightness control <Fn> + (F7)*: switch to the external display <Fn> + (F12): Hibernate * This function can only be used by the first user to log in.
  • Page 31: Using The Touchpad

    Using your notebook Using the touchpad The keyboard contains a cursor-pointing device, your touchpad. You can point to, select, drag, and scroll objects on the screen using the built-in touchpad. Action Description point Slide one finger on the touchpad (1) to place the pointer (4) on an item or object. click Press the left button (2) once.
  • Page 32: Using The Jog Dial

    Using your notebook Using the Jog Dial™ Your computer is equipped with a Jog Dial™ (1) between the right and left touchpad buttons of your computer. You can turn (2) or / and press (3) the Jog Dial™ to scroll the window, select a software, adjust the internal speaker volume, etc.
  • Page 33 Using your notebook To launch the Jog Dial Navigator software, click Start, All Programs, then Jog Dial Navigator, and choose the feature you want. A Jog Dial Navigator folder was created on your notebook. It is located in the Start, All Programs menu and contains the following items: Folder Browser Jog Dial Setting...
  • Page 34: Using The Jog Dial Bar

    Using your notebook Using the Jog Dial Bar The Jog Dial bar is the initial state of Jog Dial Navigator and can be displayed on the desktop at all times. You can choose to display it on the taskbar or hide it altogether. Launcher button VAIO Setting Mode button...
  • Page 35 Using your notebook Switching modes When you are working in an application supporting the Jog Dial Navigator functions, you can use either Scroll mode or Application mode. By switching modes, you change the functions that can be performed using the Jog Dial™. ✍...
  • Page 36 Using your notebook Using the Jog Dial Launcher start the Jog Dial Launcher, proceed as follows: ❑ In the Jog Dial Bar, click the arrow icon ❑ Hold down the <Ctrl> key and press the Jog Dial™. The Jog Dial Launcher bar appears. on the left.
  • Page 37 Using your notebook Rotate the Jog Dial™ wheel up and down to view the software applications and utilities on your computer. To launch an application, make sure it is selected and press the Jog Dial™. With some folders you will then get to a submenu.
  • Page 38: Changing Jog Dial Navigator Settings

    Using your notebook Changing Jog Dial Navigator settings You can change the operation and display of the Jog Dial Navigator with the options in Jog Dial Setting. To display the Jog Dial Setting dialog box, proceed as follows: ❑ Click the Jog Dial Setting icon ❑...
  • Page 39: Using Pc Cards

    ✍ Some PC Cards may require you to disable idle devices when using the PC Card. You can use Sony Notebook Setup to disable devices. Be sure to use the most recent software driver provided by the PC Card manufacturer.
  • Page 40: Removing A Pc Card

    Do not select and stop a USB disc drive, a Sony i.LINK™ CD-RW/DVD-ROM drive or a Sony i.LINK™ DVD-ROM drive. If you stopped a Sony i.LINK™ CD-RW/DVD-ROM drive or a Sony i.LINK™ DVD-ROM drive by mistake, disconnect the docking station and connect...
  • Page 41: Using Memory Stick

    The MagicGate Memory Stick™, coloured white. ✍ You can purchase Memory Sticks™ from the Sony Style website (http://www.sonystyle-europe.com), or from your local Sony dealer. Why Memory Stick™? Sony's vision is to expand the world of communication, promoting the portability of digital data. The Memory Stick™...
  • Page 42 Using your notebook ❑ Compactness: with dimensions of just 21.5 mm (W) x 2.8 mm (H) x 50 mm (D), compatible products can also be small, lightweight and attractive in their design. ❑ Capacity: Its data capacity far exceeds that of a floppy disk. ❑...
  • Page 43 Using your notebook Generic Memory Stick™ The original Memory Stick™, blue in colour, can be used to record image data taken with digital still cameras, etc. or data from the PC. With it, you can record, play back and transfer various kinds of data at any given time.
  • Page 44 Using your notebook MagicGate Memory Stick™ The MagicGate Memory Stick™, white in colour, records PC and image data just like its blue counterpart; the difference is it uses the MagicGate copyright protection technology. With this type of Memory Stick™, also called the MG Memory Stick™, you can enjoy the following features: ❑...
  • Page 45 MagicGate is a copyright protection technology that complies with the standards set by SDMI (Secure Digital Music Initiative, an organization working to draw up industry standard specifications in order to protect copyrights of digital music). logo indicates the copyright protection system devised by Sony. It is not meant to guarantee compatibility with other media. MagicGate MagicGate refers to the copyright protection technology used by the MagicGate Memory Stick™...
  • Page 46 (SDMI) to study technology for protecting copyrights during the electronic distribution of music. Sony offers the MagicGate Memory Stick™ and Memory Stick™ Walkman with a copyright protection function that complies with SDMI standards, thereby providing an environment where individuals can record and enjoy third-party music data without worrying about copyright infringement.
  • Page 47 Voice recorders Other: ❑ VAIO notebooks ❑ VAIO desktops ❑ CLIE Handheld Entertainment Organiser ❑ Sony mobile phones ❑ Digital printers ❑ AIBO the Sony Entertainment Robot To find out more about the products available in your country, go to: http://www.sonystyle-europe.com...
  • Page 48: Inserting A Memory Stick

    Using your notebook Inserting a Memory Stick™ To insert a Memory Stick™, proceed as follows: Once you have stored your data from your digital device, insert the Memory Stick™ with the arrow facing up and toward the Memory Stick™ slot. Carefully slide the Memory Stick™...
  • Page 49 Using your notebook Write-protecting a Memory Stick™ Memory Sticks™ are designed with an erasure prevention switch to protect valuable data from accidental erasure or overwriting. Move the tab to the right or left* to set or release write-protection. When the erasure prevention switch is off, data can be saved on the Memory Stick™.
  • Page 50: Using The Modem

    Using your notebook Using the modem Your notebook is equipped with an internal modem. You need to connect to a phone line to take advantage of online services and the Internet, but also to register your computer and software online, and to contact VAIO-Link. To connect a phone line, proceed as follows: Plug one end of the phone cable (1) into the phone line jack on the computer.
  • Page 51 Using your notebook Using the correct phone plug If there are two phone plugs in the box, make sure you use the correct one for the country you are in, as follows: UK: The connector can be identified by its cuboid shape and flat pins.
  • Page 52: Using Power Saving Modes

    Using your notebook Using power saving modes When you use a battery as the source of power for your computer, you can take advantage of power management settings to conserve battery life. In addition to the normal operating mode, which allows you to turn off specific devices, your computer has two distinct power saving modes: Standby and Hibernate.
  • Page 53: Using Hibernate Mode

    Using your notebook Using Hibernate mode The state of the system is saved on the hard disk and power is turned off. The power indicator light is off in this mode. To activate Hibernate mode, proceed as follows: Press <Fn>+<F12>. The Hibernating screen appears and the notebooks enters Hibernate mode.
  • Page 54: Using Wireless Lan (Wlan)

    The Sony WLAN supports all normal Ethernet activities, but with the added benefits of mobility and roaming. You can still access information, internet/intranet and network resources, even in the middle of a meeting, or as you move from one place to another.
  • Page 55 Using your notebook Communicating without Access Point (ad-hoc) An ad-hoc network is a network in which a local network is created only by the wireless devices themselves, with no other central controller or Access Point. Each device communicates directly with other devices in the network.
  • Page 56 Using your notebook Fill in the Network key*. The network key should be 5 digits. You can choose whatever you want. Click OK. Your Network name (SSID) appears in the Preferred networks box. Click Advanced. The Advanced dialog box appears. Select the Computer-to-computer (ad hoc) networks only check box.
  • Page 57 An infrastructure network is a network that extends an existing wired local network to wireless devices by providing an Access Point, for example the Sony PCWA-A200 Access Point. The Access Point bridges the wireless and wired LAN and acts as a central controller for the Wireless LAN. The Access Point coordinates transmission and reception from multiple wireless devices within a specific range.
  • Page 58 Using your notebook Type the Network Key. If you are using the Sony Access Point PCWA-A200, by default, the network key has the same name as the network ID, but without the first digit. For example: - ID of the network: 09316a (6 digits) - Network key: 9316a (5 digits) Click Connect.
  • Page 59 When you change the channel number on one computer, you need to change the channel number manually on all other devices intended for wireless connection. If you use a non-Sony Access Point, read the manual of the Access Point to be sure which channel to use. For more information on Wireless LAN, read the Wireless LAN Regulations leaflet.
  • Page 60: Connecting Peripheral Devices

    Connecting peripheral devices Connecting peripheral devices You can add functionality to your computer by connecting or using any of these peripherals. Before you connect peripherals, turn off the computer and all peripherals. Connect the power cord only after connecting all cables. Turn on the computer only after turning on all peripherals.
  • Page 61: Connecting A Docking Station

    Connecting peripheral devices Connecting a docking station You can use the PCGA-DSM51* CD-RW/DVD docking station to connect peripheral devices such as a printer or an external display or to use diskettes. Different ports are available when the main unit is docked and not docked. * Bundled with PCG-R600HMPD only.
  • Page 62 Connecting peripheral devices Left & Bottom i.LINK™ network switch Release lever (page 78) Ventilation slot (page 64) Floppy disk drive (page 68)
  • Page 63 Connecting peripheral devices Back DC In Ethernet network connector 2 USB connectors S400 i.LINK™ connector (page 18) Monitor connector (page 83) Printer connector (page 75) Serial port (page 78) (page 69) (page 76)
  • Page 64: Attaching Your Computer To The Docking Station

    Connecting peripheral devices Attaching your computer to the docking station To connect your computer to the docking station, proceed as follows: Plug the AC adapter cable into the DC In connector on the docking station and the other end to an AC outlet.
  • Page 65 Connecting peripheral devices Disconnecting your computer from the docking station To disconnect your computer from the docking station, proceed as follows: If the notebook is off, simply follow steps 3 to 5. If the notebook is on, click Start, then Eject PC or pull the UNDOCK switch towards you. Close the cover of your notebook.
  • Page 66: Turn On The Computer

    Connecting peripheral devices ✍ Do not undock the notebook when the docking station indicator is on. If you undock when the docking station indicator on the notebook is on, you may lose data or malfunction may occur. Make sure all cables and peripherals are removed before disconnecting the main unit from the docking station. Make sure the battery is connected when you undock the main unit while it is running.
  • Page 67 Connecting peripheral devices Using the DVD function To achieve optimum performance when playing DVD-ROM discs, you should follow these recommendations. ❑ You can play DVDs using the DVD-ROM drive and the WinDVD software. See the help file on the WinDVD software for details.
  • Page 68 Connecting peripheral devices Using the CD-RW function To burn CDs, you can use CD-RW and CD-R discs: ❑ The CD-RW (CD-ReWritable) disc is a data memory medium that can be used to write, erase and rewrite a program or other data. ❑...
  • Page 69 Connecting peripheral devices Using the floppy disk drive on the docking station The docking station is equipped with an internal floppy disk drive. You can also use an external USB floppy disk drive on the undocked main unit. It is not possible to use any USB floppy disk drive when the notebook is docked.
  • Page 70: Connecting An External Display

    Connecting peripheral devices Connecting an external display You can connect an external display to your notebook. For example, you can use your computer with the following devices: ❑ Computer display (monitor) ❑ Projector ✍ Turn off your computer and the peripherals, unplug the AC adapter and the power cord before connecting the external display. Connect the power cord after connecting all other cables.
  • Page 71 Connecting peripheral devices Connecting a computer display You can connect a computer display either directly to your notebook or via the docking station. You may not be able to display the computer's LCD and the external display together, depending on the type of computer display and projector used.
  • Page 72 Connecting peripheral devices To connect a computer display to the docking station, proceed as follows: Plug the monitor plug (1) into the docking station monitor connector (2). Plug the power cord (3) into an AC outlet. ✍ If the main unit is docked, you can only use the monitor connector on the docking station.
  • Page 73: Connecting A Projector

    Connecting peripheral devices Connecting a projector You can connect a projector (such as the Sony LCD projector) directly to your notebook or via the docking station. To connect a projector to your notebook, proceed as follows: Plug the RGB signal cable (1) into the notebook monitor connector identified by the monitor symbol.
  • Page 74 Connecting peripheral devices To connect a projector to your docking station, proceed as follows: Plug the RGB signal cable (1) into the docking station monitor connector identified by the monitor symbol. Plug the audio cable (2) into the notebook earphone connector identified by the Connect the power cord (3) of the projector into an AC outlet.
  • Page 75: Microphone Connector

    Connecting peripheral devices Connecting external speakers You can enhance the sound quality of your computer by connecting external speakers. To connect external speakers, proceed as follows: Plug the speaker cable into the notebook earphone connector identified by the Turn down the volume of the speakers before you turn them on. ✍...
  • Page 76: Usb Connector

    Connecting peripheral devices Connecting a Universal Serial Bus (USB) mouse You can connect a USB device (e.g. mouse, floppy disk drive, printer…) to your notebook or to your docking station. If the main unit is docked, you can only use the USB connectors on the docking station. To connect a USB mouse to the notebook, proceed as follows: Plug the USB cable (1) into one of the notebook USB connectors (2) identified by the symbol.
  • Page 77: Connecting A Printer

    You do not need to shut down the computer before connecting or disconnecting a USB peripheral. You can connect the optional Sony USB mouse (PCGA-UMS1 series). As the driver for this mouse is preinstalled on your computer, you can use the mouse by just connecting it.
  • Page 78 Plug the printer cable (1) supplied with the printer into the docking station printer connector (2) identified by the Plug the printer power cord (3) into an AC outlet. ✍ Before using the printer, you may need to change the Printer settings in the Sony Notebook Setup software. symbol.
  • Page 79: Connecting An I.link™ Device

    Connecting peripheral devices Connecting an i.LINK™ device Your computer includes an i.LINK™ (IEEE1394) connector, which you can use to connect to an i.LINK™ device such as a digital video camera recorder or to connect two VAIO notebooks in order to copy, delete or edit files.
  • Page 80 Connecting peripheral devices Connecting a digital video camera recorder To connect a digital video camera recorder to your notebook, proceed as follows: Plug one end of the i.LINK™ cable (1) into the i.LINK™ connector (2) of the computer and the other end into the DV Out connector (3) on the digital video camera recorder.
  • Page 81 On Sony digital video cameras, connectors labeled DV Out, DV In/Out or i.LINK™ are i.LINK™-compatible. The Sony digital video camera recorder is an example; your digital video camera recorder may need to be connected differently. If your digital video camera recorder includes a Memory Stick™ slot, you can copy images from it to your computer via a Memory Stick™. To do so,...
  • Page 82 Connecting peripheral devices Connecting two VAIO notebooks You can copy, edit or delete files on another VAIO computer to your computer with an optional i.LINK™ cable. If the second computer has the Windows the second computer has a different operating system (for example, Windows application such as Smart Connect.
  • Page 83 Connecting peripheral devices Connect the docking station to your notebook as described in Connecting a docking station (page 60). Turn on the notebook. Connect your computer to another computer with the i.LINK™ cable. ✍ When you use Smart Connect to connect two VAIO computers, you must assign each computer a unique name by which it can be identified when the two computers are networked.
  • Page 84: Ethernet Network

    Connecting peripheral devices Connecting to a network (LAN) You can connect your notebook or your docking station to 10BASE-T/100BASE-TX-type networks via an Ethernet network cable. For the detailed settings and devices needed to connect to the network, consult your Network Administrator. To connect your notebook to a LAN, proceed as follows: Connect the network cable to the Ethernet network connector (1) on the notebook.
  • Page 85 Connecting peripheral devices To connect your docking station to a LAN, proceed as follows: Connect the network cable to the Ethernet network connector (1) on the docking station. ✍ If the main unit is docked, you can only use the ethernet network connector on the docking station. For more information about connecting your notebook to the network, please consult the Hardware troubleshooting section of the VAIO-Link website: How to troubleshoot network problems Do not plug a phone cable into the Ethernet network connector on your notebook.
  • Page 86: Getting Help

    Getting help Getting help This section describes how to get help and support from Sony, and provides troubleshooting tips for your computer. Sony support options Sony provides several support options for your computer. Printed documentation supplied with your notebook ❑...
  • Page 87 ❑ Glossary refers to terms used in this manual. Refer to your Software Guide for information on the bundled software and the Sony applications. ❑ About the Software on your computer is a short description of the features of the software pre- installed on your system.
  • Page 88: Other Sources Of Information

    Getting help Other sources of information ❑ The Online help files that accompany your pre-installed software contain instructions on using the software. ❑ VAIO-Link website: if you have any problem with your computer, you can access the VAIO-Link web site. Go to: http://www.vaio-link.com ❑...
  • Page 89: Troubleshooting

    Getting help Troubleshooting This section describes how to solve common problems you might encounter when using your notebook. Many problems have simple solutions. Please, try these suggestions before contacting VAIO-Link. ❑ About the computer and software ❑ About the display ❑...
  • Page 90: About The Computer And Software

    If the floppy disk drive is empty, proceed as follows to initialise the BIOS: Turn off the computer. Remove any peripheral devices connected to the computer. Turn on the computer and press <F2> when the Sony logo appears. The BIOS setup menu screen appears. Set the date (month/day/year).
  • Page 91 Getting help Press <Enter>. Press the arrow keys to select System Time. Set the time (hour:minute:second). Press <Enter>. Press the arrow keys to select the Exit menu. Press the arrow keys to select Get Default Values and then press <Enter>. The message Load default configuration now? appears.
  • Page 92 ❑ Check that the USB mouse is plugged into the USB connector. ❑ If you are using an optional Sony USB mouse, check that the appropriate driver and mouseware are properly installed. ® taskbar, click the Start button, click Turn Off Computer, and then...
  • Page 93: About The Display

    Getting help About the display My LCD does not display anything ❑ Check that the computer is plugged into a power source and that it is turned on. ❑ Check that the power indicator on the front panel of the computer is on. ❑...
  • Page 94 Getting help I cannot play a CD-ROM ❑ After inserting the CD, wait for a few seconds for the system to detect it before you try to access it. ❑ Make sure the label of the disc is facing up. ❑...
  • Page 95 Getting help ❑ A dirty or damaged disc may cause the computer to 'hang' while it tries to read the disc. If necessary, reboot the computer, remove the disc and then check that it is not dirty or damaged. ❑ Check your PG (Parental Guidance) settings in the DVD software as this might be preventing you from playing certain DVDs when it is activated.
  • Page 96 Getting help When I double-click an application icon a message such as 'You must insert the application CD into your CD-ROM drive' appears and the software does not start. ❑ Some titles require specific files that are located on the application CD-ROM. Insert the disc and try starting the program again.
  • Page 97 Getting help The optional PCGA-UFD5 (USB) floppy disk drive is not recognised as drive A To set the UFD5 to A, proceed as follows : Turn the system power on. Connect the UFD5. Select Control Panel from the Start menu. Double-click System.
  • Page 98: Headphone Connector

    Getting help Perform the Scan for hardware changes from the Action menu. The docking station floppy disk drive is recognised as drive A. About sound My speakers are not producing sound ❑ The built-in speakers may be turned off. Press <Fn>+<F3> to turn on the speakers. ❑...
  • Page 99: About The Docking Station

    Getting help About the docking station I cannot operate the CD-RW/DVD-ROM drive or the DVD-ROM drive in the docking station connected to the notebook To switch on the i.LINK™ network switch, proceed as follows : Disconnect your notebook from the docking station. Disconnect the AC adapter and all cables from the docking station if necessary.
  • Page 100: About The Modem

    Getting help About the modem My internal modem does not work ❑ Check that the phone line is plugged into your computer. ❑ Check that the phone line is working. You can check the line by plugging in an ordinary phone and listening for a dial tone.
  • Page 101: About Peripherals

    ❑ Use manual import/export in DVGate motion if problems occur with third party cameras. ❑ You are strongly advised to use only Sony i.LINK™ cables, as using other brands may cause problems with the i.LINK™ devices. I cannot print ❑...
  • Page 102: About Digital Video Captures And Dvgate

    Getting help About digital video captures and DVgate While I am recording images to a digital video device using DVgate, my system displays the message 'Recording to DV device failed. Check the power and cable connections to the DV device and try the operation again...' ❑...
  • Page 103 Getting help ❑ Check if the Access Point is displayed in the Available networks window. ❑ To check this, click Start and then Control Panel. ❑ Double-click the Network Connections icon. ❑ Right-click the Wireless Network Connection icon and select Properties. ❑...
  • Page 104 Getting help The maximum communication speed is not reached The maximum communication speed is 11 Mbps, but this can never be reached. The normal speed is 4 to 5 Mbps. The communication speed slows down when transferring MPEG2 data. The file transfer is interrupted This can happen when the file size is too big.
  • Page 105: Adding And Removing Memory

    Precautions Precautions This section describes safety guidelines and precautions to help you protect your computer from potential damage. Your notebook and memory modules use high precision components and electronic connectors technology. To avoid the invalidation of your guarantee by mishandling, it is recommended that: ❑...
  • Page 106 Precautions ❑ Disconnect the system from its power source and from any telecommunication links, networks, or modems before you open the system. Failure to do so may result in personal injury or equipment damage. ❑ Electrostatic Discharge (ESD) can damage memory modules and other components. Install the memory Module only at an ESD workstation.
  • Page 107 Precautions Changing or adding a memory module To change or add a memory module, proceed as follows: Shut down your computer and disconnect all peripheral devices. Unplug the computer and remove the battery pack. Wait until the computer cools down. Unscrew the two screws at the bottom of your computer.
  • Page 108 Precautions Lift the keyboard from the LCD display side and gently turn it over the touchpad. Be careful not to detach the cable (1) when lifting the keyboard. Touch a metal object (such as the connector panel on the back of your computer) to discharge static electricity.
  • Page 109 Precautions ❑ Slide the memory module into the slot. ❑ Snap the connectors into place when the board is correctly seated. Gently replace the keyboard, then press it into your computer. Be careful not to detach the cable when lifting the keyboard. Close the computer cover, then tighten the screws on the bottom of the computer.
  • Page 110: Other Precautions

    To view the amount of memory, proceed as follows: Turn on the computer. Go to Sony Notebook Setup via the Start menu. The Sony Notebook Setup dialog box appears. In the About this Computer tab you can view the amount of system memory. If the additional memory does not appear, repeat the whole procedure and restart the notebook.
  • Page 111 Precautions On handling the LCD screen ❑ Do not leave the LCD facing the sun as it can damage the LCD. Be careful when using the computer near a window. ❑ Do not scratch the LCD or exert pressure on it. This could cause malfunction. ❑...
  • Page 112 Precautions On handling your notebook ❑ Clean the cabinet with a soft, dry cloth or a soft cloth lightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these may damage the finish of your computer.
  • Page 113 Precautions ❑ Do not use cut or damaged connection cables. ❑ Your computer cannot be connected to a coin-operated telephone, and may not work with a private branch exchange (PBX). ❑ If the computer is brought directly from a cold location to a warm one, moisture may condense inside your computer.
  • Page 114 Precautions ❑ Proper care of the disc is essential to its continuous reliability. Do not use solvents such as benzine, thinning agents, commercially available cleaners or anti-static spray, as they may cause damage to the disc. ❑ For normal cleaning, hold the disc by its edge and use a soft cloth to wipe the surface from the centre out.
  • Page 115 Precautions On using headphones ❑ Road safety – Do not use headphones while driving, cycling, or operating any motorised vehicle. It may create a traffic hazard and is illegal in some areas. It can also be potentially dangerous to play loud music while walking, especially at pedestrian crossings.
  • Page 116 Glossary Glossary This section refers to terms used in this manual. These terms and definitions have been compiled to provide you with a better understanding of your VAIO computer. Term <F1> key 10BASE-T/100BASE-TX ACPI Application recovery Application recovery CD-ROM BIOS CardBus Definition The <F1>...
  • Page 117 Glossary Term CD-ROM CD-RW DC In Docking station Driver DVD-ROM Ethernet Definition Abbreviation for Compact Disc Read-Only Memory. A high-capacity optical disc, usually 650 MB in size, capable of being read from but not written to. Short for Compact Disc-ReWriteable. Compact Disc that can be used to write or rewrite data to it.
  • Page 118 The EULA can be found in the Read this first section at the beginning of the software guide or directly on the VAIO desktop. i.LINK™ is Sony’s version of the IEEE 1394 standard for high-speed digital serial interface. The standard is regarded in the audio/video and IT industries as the most suitable interface for connecting computers and digital audio/video devices (such as digital cameras etc.).
  • Page 119 Glossary Term MAPI maximum RAM Motherboard MPEG Operating system Partition Definition Short for Messaging Application Program Interface. A Microsoft Windows interface enabling you to send e-mail messages. It allows e-mail access and distribution among applications. MAPI-compatible applications include a Send Mail or Send in the File menu of the application.
  • Page 120 Glossary Term PC Card PCMCIA Pixel Port replicator Processor Product recovery CD-ROM PS/2 PSTN Definition A PCMCIA card. The term PC Card is more widely used than PCMCIA. See PCMCIA. PCMCIA (Personal Computer Memory Card International Association) is the name of the group that produced the specification for the credit card-sized plug-in boards for laptop computers.
  • Page 121 Glossary Term Resolution RGB signal cable SDRAM Standard RAM System recovery System recovery CD-ROM Definition Short for Random Access Memory, the memory used to run programs and store data in current use. RAM is the fastest kind of memory to read from and write to. Information stored in RAM is lost when you turn off the computer.
  • Page 122 You can connect up to 127 devices to a USB port. The USB standard is Hot Plug and Play. Short for Video Audio Integrated Operation. Brand name covering Sony's PC products, peripherals, accessories and software. VAIO-branded items are all designed to make the best use of Sony's Audio-Video (AV) and Information Technology (IT) skills.

This manual is also suitable for:

Vaio pcg-r600hmpd

Table of Contents