Table of Contents
Advertisement
Connecting peripheral devices
Connecting a Universal Serial Bus (USB) device
Connecting a USB mouse
You can connect a USB device (e.g. mouse, floppy disk drive...) to your computer.
To connect a USB mouse, proceed as follows:
Plug the USB mouse cable into the USB connector.
You can use your USB mouse .
You do not need to shut down the computer before connecting or disconnecting a USB peripheral.
The USB mouse software driver of PCGA-UMS1 is preinstalled on your notebook, therefore, you only need to plug the USB mouse into the USB
connector and you can start working.
You may need to install software (device drivers) supplied with your USB device before using the USB device.
You cannot use a PS/2 style mouse.
Connecting a USB floppy disk drive
You can connect a floppy disk drive to the USB connector on your computer.
Connecting the floppy disk drive
To connect the floppy disk drive, proceed as follows:
Plug the floppy disk drive cable into the USB connector identified by the
disk drive should be facing up.
n N
46
symbol. The VAIO logo on the
Advertisement
Table of Contents
