Table of Contents
Advertisement
Using the product recovery CD-ROMs
Do not try to add, delete, or resize partitions unless you really need to. Changing partition settings might delete all your files on the hard disk.
If you need to perform a system recovery, but do not want to lose all the data stored on your hard disk, copy all the files you want to keep on the D:
drive. During the system recovery process, choose to keep the current partition information. Doing so will keep your D: drive unchanged after the
recovery process.
If you do need to change the size of your partitions, you can do so by choosing Option Recovery in the system recovery set-up process. In this case,
it is important to be aware that all data on your hard disk will be deleted. If you need to keep existing files, make sure you back them up before
performing the system recovery.
Starting the system recovery procedure
To start the system recovery, proceed as follows:
1
Turn on your computer (using AC power only) and insert the first system recovery CD-ROM into the disc
drive.
2
If you are still able to access Windows
off)*.
3
Wait 10 seconds then turn the computer back on.
4
The system starts to read the CD automatically and you are asked to wait.
5
Click Next in the window that appears.
6
Read the introduction and click Next.
You can now choose the nature of the recovery.
* If your system is severely damaged and you can no longer access Windows
power button for longer than four seconds. Wait for ten seconds before pressing the button again to turn the power on.
®
, shut down your computer (Start/Turn Off Computer/Turn
®
, you will have to turn off the computer by pressing the
n N
91
Advertisement
Table of Contents
