Gardener's 8596999 Quick Start Manual

Pest Free Garden
Parts List
Raised Bed:
(7) 8"H or (14) 4"H BOARDS
(4) ALUMINUM CORNERS
(2) IN-LINE CONNECTORS
(6) CORNER INSERTS
PHILLIPS SCREWS
Raised Bed Assembly
1. Choose a level area for your raised bed. If you are installing it on
a lawn, we recommend removing the sod and loosening the soil
with a shovel or spade to a depth of 6".
2. Place the BOARDS on their sides to form a rectangular bed as
shown in Figure 1. Seat the ends of the BOARDS into the four
ALUMINUM CORNERS and assemble the long sides of the bed by
inserting the BOARDS into the IN-LINE CONNECTORS (Figure 2).
Make sure the BOARDS are fully seated and level with the bottom
of the CORNERS and CONNECTORS.
3. Use your screw gun to insert SCREWS into the holes in the
CORNERS and CONNECTORS. Make adjustments as you work
your way around the bed to be sure the BOARDS are fully seated
and level with the CORNERS.
4. Install the CORNER INSERTS into the tops of the ALUMINUM
CORNERS and IN-LINE CONNECTORS (Figure 3). NOTE: Gently tap
them into place with rubber mallet if necessary.
5. Fill the raised bed with a mixture of garden soil and plenty of
organic matter, such as compost. It holds 460 quarts (18 cubic
feet) of soil.
Figure 2
#8596999
Crop Cage:
(12) LONG TUBE 1
(11) SHORT TUBE 2
(11) SHORT TUBE 3, with spring
(4) 3-WAY T-CONNECTOR A
(4) 3-WAY CORNER D
(4) 4-WAY CORNER CONNECTOR E
(1) NET COVER
(18) EARTH STAPLES
8% of our profits
Learn more at gardeners.com/
Tools Needed
Screw gun with Phillips screwdriver tip
Rubber mallet or hammer
Illustrations show assembly with 8" H boards
Figure 1
Boards
Corners
Figure 3
tie
Corner
Insert
Corner
go back to our communities.
FoRCE-FoR-GoOD
1-800-876-5520 • gardeners.com
info@gardeners.com
Crop Cage
In-Line Connector
Net
Cover
0968G Rev 04/2021
Raised
Bed