First Time Setup; Using Menu System; Auto Scan; Automatic Update - TCL LED49D2900S Operation Manual

First Time Setup

First Time Setup involves selecting all the settings
required to be able to search for and store all the
channels you can receive. Make sure that the television
is switched on and follow all the steps in turn specified
hereafter.
The first time you switch the set on, the First Time Setup
wizard opens, which guides you through the initial setup
process.
First Time Setup
Press the up or down direction button to select Auto
Scan and press the OK or right direction button to
start the search automatically. All available TV
programmes are stored. This operation takes a few
minutes. The display shows the progress of the search
and the number of programs found.
Note: to prevent the channel setup process from being
interrupted, wait for the message indicating that the
setup is completed.
In this step, you can also select Exit to skip the
channel search progress. But when you turn the TV on
next time, the prompt on the screen will remind you to
do the channel scan first.
Note: the Store mode does not satisfy the MEPS
certification, suggest selecting Home.

Using Menu System

This section explores the menus of your TV. Each menu
is outlined and detailed to help you get the most from
your TV.
Hue
To access the menu system:
1. Press the Menu button to display the main menu.
General Operation
2. Press the left or right direction buttons to select the
desired item, then press the OK button to open the
corresponding submenu.
3. In submenus, use the up or down direction button to
select menu options, use the left or right direction button
to set functions or change values. Use the OK button
to activate a setting. Use the OK or right direction button
to open the corresponding submenu.
4. Press Menu to return to the previous menu or press
Exit to close the menu.

Auto Scan

This option allows the TV to search for, find and store all
the available analog and digital channels.
Follow all the steps in turn specified hereafter.
Auto Scan
1. Press the Menu button to display the main menu, and
select Channel>Tuner Type(Satellite, Antenna, Cable),
then press the left or right direction button to select the
tuner type.
2.Select Auto Scan, then press the OK or right
direction button to enter.
3. Select DTV & ATV (or DTV or ATV),
then press the up/down direction button to highlight the
Start, press the OK or right direction button to start the
automatic search process.
The search may take a few minutes. During the
process, you can press Menu or Exit to abort halfway.

Automatic Update

This allows you to update all available channels, without
altering the sorting of existing channels. (only available in
DTV mode)
1. Display the Channel menu, press the up or
down direction button to highlight Auto Channel
Update option.
2. Press the left or right direction button to select On/Off
to update the channel.
8