Setting Of The Bar Code Function - JUKI AP-876 Instruction Manual

4. Setting of the bar code function

4-1. Setting of the bar code function
On memory switch K130, select the bar code mode. Refer to the engineer's manual for the selection
method of the memory switch K130 (level 2).
4-2. Selection of the bar code type
On memory switch K142, a type of bar code is selected. In the default state, Code39 only will be read.
When the attached bar code is printed for use, the change to K142 will not be required.
Setting Content
Standard mode
Bar code mode
Setting Content
Code39
All standards.
– 3 –
Explanation
Bar code is not used.
Bar code is used.
Explanation
Code39 only will be read.
All standards that the bar code
reader is compatible to will be
read.
JAN, EAN, UPC-A/E, EAN-8/13
Add-on, UPC-A/E Add-on,
Industrial 2 of 5, IATA, Interleaved
2 of 5, NW-7(Codabar), Code39,
Code93, Code128, EAN-128,
S-Code, MSI/Plessey, RSS, Tri-
Optic, CODE11, UK/Plessey,
Matrix 2 of 5, Chinese Post Matrix
2 of 5, TELEPEN