Canceling A Print Job; Making Copies; Canceling A Copy Job - Lexmark X925 Quick Reference

Warning—Potential Damage: Do not touch the USB cable, any
network adapter, any connector, the memory device, or the
printer in the areas shown while actively printing, reading, or
writing from the memory device. A loss of data can occur.
2
From the printer control panel, touch Print from USB, and then
select the document you want to print.
3
Touch the arrows to increase the number of copies to print, and
then touch Print.
Notes:
• Do not remove the flash drive from the USB port until the
document has finished printing.
• If you leave the flash drive in the printer after leaving the
initial USB menu screen, then you can still print files from the
flash drive as held jobs.

Canceling a print job

Canceling a print job from the printer control
panel
1
From the printer control panel, touch Cancel Job or press
the keypad.
2
Touch the print job you want to cancel, and then touch Delete
Selected Jobs.
Note: If you press on the keypad, then touch Resume to
return to the home screen.
Canceling a print job from the computer
For Windows users
1
Open the printers folder.
In Windows 8
From the Search charm, type run, and then navigate to:
Apps list > Run > type control printers > OK
In Windows 7 or earlier
a
Click or click Start, and then click Run.
b
In the Start Search or Run dialog, type control printers.
c
Press Enter, or click OK.
2
Double‑click the printer icon.
3
Select the print job you want to cancel.
4
Click Delete.
For Macintosh users
1 From the Apple menu, navigate to either of the following:
• System Preferences > Print & Scan > select your printer > Open
Print Queue
•
System Preferences > Print & Fax > select your printer > Open
Print Queue
2
From the printer window, select the print job you want to cancel,
and then delete it.
Copying

Making copies

Making a quick copy
on
1
Load an original document faceup, short edge first into the ADF or
facedown on the scanner glass.
10
Note: Do not load postcards, photos, small items,
transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
Adjust the paper guides when loading a document into the ADF.
Note: Make sure the size of the original document and the copy
paper size are the same. Failure to set the proper size may result
to a cropped image.
3 From the printer control panel, press
Copying using the ADF
1
Load an original document faceup, short edge first into the ADF.
Note: Do not load postcards, photos, small items,
transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
Adjust the paper guides.
3
From the home screen, navigate to:
Copy > change the copy settings > Copy It
Copying using the scanner glass
1 Place an original document facedown on the scanner glass in the
upper left corner.
2
From the home screen, navigate to:
Copy > change the copy settings > Copy It
3
If you have more pages to scan, then place the next document on
the scanner glass, and then touch Scan the Next Page.
4
Touch Finish the Job to return to the home screen.

Canceling a copy job

Canceling a copy job while the document is in
the ADF
When the ADF begins processing a document, the scanning screen
appears. To cancel the copy job, touch Cancel Job on the touch screen.
A "Canceling scan job" screen appears. The ADF clears all pages in the
ADF and cancels the job.
to start copying.