Management; Temperature - Black Box CityLIGHT LCL533A Manual

CITYLIGHT 10/100 ETHERNET TRANSCEIVER CARD

2.9 Management

The CityLIGHT 10/100 Ethernet Transceiver is managed via the CityLIGHT
SNMP Module which supports both In-Band and Out-of-Band management of the
unit.
Once installed in a chassis with an SNMP card or connected via the fiber to a card
in an SNMP-managed chassis, the SNMP agent automatically detects the card
and displays the following information.
NOTE: This information is the same for the local and remote cards and is
available via the terminal interface as well as the SNMP MIB.
i)
ii) Card Speed
iii) Fiber Port Link Status
iv) Copper Port Link Status
v) Temperature
vi) Fan Status
vii) Laser Bias Current
viii) PSU Voltage
ix) Redundant PSU State
x) Serial Number
xi) Firmware Version Number
xii) Location (entered by the user, see SNMP card manual for details)
The CityLIGHT SNMP Module provides trap alarms for the following parameters
of the CityLIGHT Fiber Extender Module.

2.9.1 Temperature

This is the temperature of the CityLIGHT Fiber Extender Module. A trap alarm is
generated if the temperature is not within the required range.
14
Card Type