Sending Documents; Direct Sending; Manual Sending - Canon FAX-B155 User Manual

Sending documents

Direct Sending __________________________________

To scan and transmit a document one page at a time without storing it in memory
first, follow the steps below. This procedure is called "Direct Sending".
Use Direct Sending if you want to visually confirm that the fax scans the document.
Each page is scanned as it is sent.
1
Feed the document face-down into the Auto-
matic Document Feeder (ADF).
See Loading the document, p. 49.
You can set the resolution and density. See p. 51.
2
Dial the other party's fax number.
Use one of the dialling methods described earlier in
this chapter. See p. 56.
3
Press [Start/Copy].
The fax begins sending the document.

Manual Sending ________________________________

If you would like to first speak with the person you are sending the fax to, use
Manual Sending. You need to connect the optional handset or an extension phone to
the fax for Manual Sending.
1
Feed the document face-down into the Auto-
matic Document Feeder (ADF).
See Loading the document, p. 49.
You can set the resolution and density. See p. 51.
2
Pick up the handset or press [Hook] and dial the
other party's fax number.
Use one of the dialling methods described earlier in
this chapter. See p. 56.
3
If a person answers, converse normally, then
ask them to press the start button on their fax.
Press [Start/Copy] and hang up.
If you hear a high pitch tone, press [Start/Copy] and
hang up.
STANDARD
0 9
TEL=
Start/Copy
STANDARD
Hook
TEL=
0 9
Start/Copy
5
34567890
34567890
57