ASSEMBLY INSTRUCTIONS (per fixture)
5. Place ceiling plate (A) over outlet box. Position heads of
the mounting screws (CC) to protrude through the large
ends of key holes on the ceiling plate (A). Twist ceiling
plate (A) until heads of mounting screws (CC) slide into
narrow end of key holes. Tighten mounting screws (CC)
to secure ceiling plate (A) firmly to the ceiling.
Hardware Used
CC
Mounting Screw
6. Thread nipple (EE) into coupling (B), then use the
preassembled hex nut on nipple to tighten connection
using pliers.
Note: You may need to adjust the length of the the
threaded nipple (EE) to assure there is enough thread
exposed from center hole of the glass to install the cap
(HH).
7. Install 60-watt or less medium-base bulbs (not
included) into socket (C).
8. Attach glass shade (D) to ceiling plate (A). Secure with
glass grommet (FF), hex nut (GG), cap (HH), and finial
(II), in that order.
5
x 2
6
7
8
A
D
HH
7
CC
A
B
EE
C
FF
GG
II