Project Source 40017 Manual page 5

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents above. If any part is missing or damaged, do not attempt to
assembly the product. Contact customer service for replacement parts.
Estimated Assembly Time: 20 minutes
Tools required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety
Glasses, Step Ladder and Wire Strippers
Helpful tools (not included): AC Tester Light, Tape Measure, Wiring Handbook, and Wire Cutters
1. Turn off circuit breakers and wall switch to the fixture
supply line leads.
DANGER: Failure to disconnect power supply prior
to installation may result in serious injury or death.
2. Remove old fixture. Disconnect wiring.
1
2
5