PCM-D100
2-20. MIC ASSY (MIC1)
Note 1: When replacing the MIC assy (MIC1),
replace left and right at the same time.
Do not replace only one side.
2 MIC (R) assy
2 MIC (L) assy
1 stopper
(M1.7
3.0)
1 stopper
(M1.7
18
– Front top view –
3.0)
Met o o insta in t e MIC assy (MIC )
Note 2: Check the "R" mark not
to mistake right and left.
Note 3: Align the screw hole.
Note 3: Align the screw hole.
Note 2: Check the "L" mark not
to mistake right and left.
– MIC (R) assy rear view –
ditch
ditch
ditch
ditch
– MIC (L) assy rear view –