Table of Contents
Advertisement
ADJUSTMENT [LCD] USA
Pressing POWER button to turn off the TV once.
Self Diagnostic Function
1. Press "Recall" button on Remote Control during display of adjustment menu in the
service mode. This will bring up the "S" in the right corner of screen. Now press "9"
button on remote.
The diagnosis will begin to check if interface among IC's is executed properly.
2. During diagnosis, the following displays are shown.
(1) Version information of TV-MICRO
(2) Version information of TV-MICRO EEPROP
(3) Version information of DVD MPU
(4) Revision of image file
(5) Total brightness hour of TV.
(6) Operation hour of TV in LOW mode
(7) Operation hour of TV in HIGH BRIGHT mode
(8) Number of times of TV ON/OFF.
(9) Temperature display of thermo-Sensor. (DMD) : LCD Model not used.
(10) Temperature display of thermo-Sensor. (LAMP) : LCD Model not used.
file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32lv17u_sm\32LV17...
: Display 1 byte data.
: Display 1 byte data.
: LV series
: LCD Model not used.
: Display 4 bytes data.
: Display 4 bytes data.
: LCD Model not used.
: LCD Model not used.
Стр. 6 из 8
30.04.2015
Advertisement
Table of Contents
