Toshiba 32LV17U Service Manual page 15

ADJUSTMENT [LCD] USA
VVDD Reduce Volume For Dolby
WFCS FOCUS Level
WWSP SRS 3D Level
WTBH TruBass High Level
WTBL TruBass Low Level
VOLM Volume coefficient at 1/2 Mute
Factory preset data will be loaded after setting Model ID data.
Note: (*1) SET-ID data is subject to the models.
Refer to Setting Panel Option Data and SET-ID Data for detail.
Adjusting the Data
Pressing of VOLUME
FFH. The variable range depends on the adjusting item.
Setting Panel Option Data and SET-ID Data
1. Panel option data is subject to OP4 and OP5.
Enter to service mode and select menu of OP4 or OP5 by pressing P
Display of adjustment menu. After selecting OPT4 or OPT5, press
OPT4 or OPT5 value as table below.
2. Whenever using new signal board to the set, setting the SET-ID data according to panel
option data.
Set Size Panel Maker OPT4 OPT3 OPT5 SET-ID
LV67U 32 SAMSUNG
LV37U 32 SAMSUNG
LV17U 32 SAMSUNG
Exit from Service Mode
file://D:\Documents and Settings\Admin\Рабочий стол\toshiba_32lv17u_sm\32LV17...
or button will change the value of data in the range from 00H to
65h 00h 00h
65h 00h 00h
65h 00h 00h
F3H (b)
01H (b)
02H (b)
03H (b)
02H (b)
32H (b)
A1h
A1h
A1h
Стр. 5 из 8
or P during
+ or - to set
30.04.2015