Toshiba 32WL66A Service Manual page 10

9. VERSION CHECK MODE
1) Press "" button twice on Remote Control during display of adjustment menu in the service mode. The version of main
MPU will begin to check.
2) During Version Check, the following displays are shown.
 MAIN MPU
 EEPROM
 SUB MPU
 OPTION
 HDMI ID
 DB SW Ver
DB MW Ver

A/D Adjust


MAIN MPU :
Version information of microprocessor
In case of file name : WL66_ASIA, Version 0326 for Code Program Version and (A01)

EEPROM :
Version information of EEPROM : Display 1 byte data.

SUB MPU :
Version information of SUB MPU : Display 1 byte data.
 OPTION :
Option information : Display six numbers of 1 byte data.
 HDMI ID :
HDMI ID information : Display 4 byte data.

SW Ver
Version information of DB software. (Only digital model)

MW Ver
Version information of DB software middleware. (Only digital model)
 A/D Adjust
A/D adjustment item.
- COMP
: Component input
- PC
: PC input
- NTSC
: NTSC(60Hz)SD signal (composite input).
- PAL
: PAL(50Hz)SD signal (composite input).
- OK
: A/D adjustment set correctly.
- NG
: A/D adjustment set incorrect.
r LCD Panel Vender information display
The following Panel Vender and screen size are displayed.
Panel Vender
LPL
SHP
CMO
AUO
Example : AUO-32 indicates that Vender is AUO and Screen Size is 32 inch.
Version check
: WL66_ASIA_0326(A01)
: 01
: 02(NO RTC)
: 00 11 22 33 44 55
: 11223344
: 1.0
: 2.0
: COMP PC NTSC
OK NG OK
AUO-32
for OSD Version indicates [WL66_ASIA_0326(A01)] (This may differ among the destination)
Screen Size(Inch)
-26
-32
-37
-42
-47
This may differ among the destination.
PAL
NG
r
- 10 -
32WL66A/E/R/T