(5) Heat consideration
Keep the wiring away from the exhaust pipe by 150 mm
minimum, and from the muffler by 250 mm minimum.
·
In cases where the above clearance can not be satisfied,
protection against the heat such as a heat insulating
plate is required.
(6) Interference
① Take care that the wiring is not damaged by contact with the rotating or vibrating parts of the alteration or
building.
② The wiring of the parts mounted on the engine or
transmission should be laid along the existing wire
harness with a sufficient sag in a manner to absorb
relative motions while taking care that it does not come
in contact with other parts.
(7) Earth
① Install the earth for an additional power supply always
on the engine or frame.
② Mount the earth terminal securely in the form of a
circular plate terminal.
【2】-11. Electrical wirings
48