Table of Contents
Advertisement
(3) Mounting and demounting the connector
When removing the connector, don't pull the wire harness
but by holding the connector body.
(4) Heat consideration
① Secure an adequate
temperature parts.
② Measure the temperature whenever required to
eliminate the safety problems.
· Don't lay the wiring in the vicinity of the exhaust pipe
or muffler or where the wiring is exposed directly to
the exhaust gas.
(5) Serviceability
Make sure that the inspection and maintenance work on
the wirings and electrical equipment can be conducted
easily after the particular building or alterations.
(6) Mounting additional buzzer
When mounting a buzzer or the like on the alterations, always be sure that the sound of the buzzer is different
from and does not double as that of any of the existing buzzers.
【2】-11. Electrical wirings
clearance
with
the high-
44
Hide quick links:
Advertisement
Table of Contents
