Advertisement
Quick Links
Advertisement
Related Manuals for BRC NoLita
Summary of Contents for BRC NoLita
- Page 1 NoLita Installation Guide...
- Page 2 POSITION THE FRONT AND RETURN BASE AS SHOWN BELOW, SO THAT THE CONNECTION POINTS WILL BE IN FRONT OF EACH OTHER FRONT BASE RETURN BASE REMOVE ALL TRIMS EXCEPT FOR THE FRONT (MODESTY) TRIM.
- Page 3 REMOVE ALL PANELS: FIRST MOVE THEM UP, AND THEN PULL THEM BACK. CONNECT THE TWO FRAMES TOGETHER USING THE HARDWARE SHOWN BELOW. MAKE SURE ALL CONNECTIONS ARE TIGHT...
- Page 4 CONNECT THE WIRE MANAGER BRACKET TO THE SPECIFIED LOCATION WITH THE PROVIDED SELF TAPPING SCREWS. REPLACE TRIMS AND PANELS. CONNECT THE LIFTING COLUMN WIRING AND POWER THEM UP. POSITION THE LIFTING COLUMNS AT MAXIMUM HEIGHT.
- Page 5 LEVEL THE BASE USING THE LEVELERS UNDER EACH LIFTING COLUMN. LEVELERS PLACE THE WORK SURFACES ON THE TOP FRAMES AND ALIGN THEM USING THE PILOT HOLES. PILOT HOLES SHOULD BE ALIGNED WITH END BRACKET HOLES. ALL WORK SURFACES ON ONE SIDE HAVE 3 PILOT HOLES AND ON THE OTHER SIDE ONLY 2.