6. ...software upgrade procedure (continued)
Sub Software Update
In this section, it explains the method of updating Sub software.
This procedure should be processed only when it is necessary to update Sub software.
1) Turn off the TV set power.
2) Connect E8 or E8a and PC with USB
connection cable.
3) Connect the E8 or E8a to connector
PM02:ZH-10pin.
4) Start "Flash Development Toolkit 4.00 Basic".
(Start > All Program > Renesas > Flash Development Toolkit 4.00 > Flash Development Toolkit 4.00 Basic)
5) Select a download file. (ex. D8M_SUB_V007.mot)
� �
Rear view
����
���������
26
����
�
Click
D8MW