Table of Contents
Advertisement
Step 3 : console preparation
zzz
yyy
zz
yyy
y z
zzz
3a
3a
G
zzz
|||
yyy
zz
yyy
||
|||
a.
Use 12 screws,'G' to fix the base of the console to the side
panels, as illustrated. Use the allen key 'U' to tighten the
screws.
b.
Push fit the glide feet 'H' in place.
4 4
yy
H
|
|
|
3b
3b
IMPORTANT
These holes have a recess
on one side. The top panel
must be fitted so that the
recess is on the underside.
a.
Turn the console over, onto its feet, and slide the back panel
into place.
b.
IMPORTANT - Before fixing the top panel in place, make
sure that it is facing the correct way up!
The side with large recessed holes must be on the
underside.
Once you are sure that the top panel is fitted correctly, use 4
screws,'G' to fix the top panel to the side panels, as illustrated.
Use the allen key, 'U' to tighten the screws.
c.
Fit both components 'I' in place.
G
G
I
Advertisement
Table of Contents
