Related Manuals for RIEKER Flex H6EX-A2
Summary of Contents for RIEKER Flex H6EX-A2
- Page 1 Inclinometers for Hazardous Locations Current 0..24mA Voltage 0..10V Dual Axis Up to 360º Flex™ H6EX-A2 Installation Manual 2021...
-
Page 2: Table Of Contents
5: F ....................7 IGURE RONT URFACE ARKINGS FOR ERIAL UMBER 6: F ......................7 IGURE ACTORY ONFIGURED EFAULTS ABEL RIEKER INC • 34 MOUNT PLEASANT ROAD • ASTON • PA • 19014 • USA 610-500-2000 fax: 610-500-2002 support@riekerinc.com www.riekerinc.com... -
Page 3: Sensor Description
AVERTISSEMENT: Si l’équipement est utilisé de façon non spécifiée par le fabricant, la protection assurée par l’équipement peut être altérée. RIEKER INC • 34 MOUNT PLEASANT ROAD • ASTON • PA • 19014 • USA 610-500-2000 fax: 610-500-2002 support@riekerinc.com... -
Page 4: Applicable Standards
47 CFR Ch. 1 – FCC Part 15 Class A – Radio Frequency Devices – Subpart B – Unintentional Radiators • ICES-003 – Issue 6 January 2016 Class A –Interference-Causing Equipment Standard – Digital Apparatus RIEKER INC • 34 MOUNT PLEASANT ROAD • ASTON • PA • 19014 • USA 610-500-2000 fax: 610-500-2002 support@riekerinc.com... -
Page 5: H6Ex-A2 Instructions For Safety
The sensor is designed to measure dual-axis inclination and output an analog signal. Assembling and Dismantling The H6EX-A2 shall not be serviced, dismantled, or re-assembled by the user. RIEKER INC • 34 MOUNT PLEASANT ROAD • ASTON • PA • 19014 • USA 610-500-2000 fax: 610-500-2002 support@riekerinc.com... -
Page 6: Maintenance
(bottom right of Figure 3), a clockwise rotation from the zero position is considered positive and a counter-clockwise rotation from the zero position is considered negative. RIEKER INC • 34 MOUNT PLEASANT ROAD • ASTON • PA • 19014 • USA 610-500-2000 fax: 610-500-2002 support@riekerinc.com... -
Page 7: Adjustment
No software adjustments of H6EX-A2 analog output parameters are permitted. Scaled analog parameters can be factory-set only and must be selected at time of purchase. RIEKER INC • 34 MOUNT PLEASANT ROAD • ASTON • PA • 19014 • USA 610-500-2000 fax: 610-500-2002 support@riekerinc.com... -
Page 8: Markings
In addition, the factory defaults label, located on the box of the H6EX-A2 sensor, provides the configured analog output parameters. FIGURE 6: Factory Configured Defaults Label RIEKER INC • 34 MOUNT PLEASANT ROAD • ASTON • PA • 19014 • USA 610-500-2000 fax: 610-500-2002 support@riekerinc.com... -
Page 9: H6Ex-A2 Connector Wiring Tables
NOTE: The H6EX-A2 Sensor’s Chassis Ground is NOT the same as the signal ground for the current output return. The analog output return must be connected to the POWER/SIGNAL COMMON (pin 2). RIEKER INC • 34 MOUNT PLEASANT ROAD • ASTON • PA • 19014 • USA 610-500-2000 fax: 610-500-2002 support@riekerinc.com... -
Page 10: Revision History
Add dust atmosphere certifications. Updated applicable standards. Caleb Swieson Rev D 04/22/2021 Updated Controlled Document warning per CN 21-04-008. Caleb Swieson RIEKER INC • 34 MOUNT PLEASANT ROAD • ASTON • PA • 19014 • USA 610-500-2000 fax: 610-500-2002 support@riekerinc.com www.riekerinc.com...
Need help?
Do you have a question about the Flex H6EX-A2 and is the answer not in the manual?
Questions and answers